All scene management can be found in this namespace: Mesh loading, special scene nodes like octrees and billboards, ... More...

Classes
class	CDynamicMeshBuffer
	Implementation of the IMeshBuffer interface for which can work with 16 and 32 bit indices as well as different vertex types. More...

class	CIndexBuffer

class	CMeshBuffer
	Template implementation of the IMeshBuffer interface for 16-bit buffers. More...

class	CVertexBuffer

class	IAnimatedMesh
	Interface for an animated mesh. More...

class	IAnimatedMeshMD2
	Interface for using some special functions of MD2 meshes. More...

class	IAnimatedMeshMD3
	Interface for using some special functions of MD3 meshes. More...

class	IAnimatedMeshSceneNode
	Scene node capable of displaying an animated mesh. More...

class	IAnimationEndCallBack
	Callback interface for catching events of ended animations. More...

class	IBillboardSceneNode
	A billboard scene node. More...

class	IBillboardTextSceneNode
	A billboard text scene node. More...

class	IBoneSceneNode
	Interface for bones used for skeletal animation. More...

class	ICameraSceneNode
	Scene Node which is a (controllable) camera. More...

class	IColladaMeshWriter
	Interface for writing meshes. More...

class	IColladaMeshWriterNames
	Callback interface to use custom names on collada writing. More...

class	IColladaMeshWriterProperties
	Callback interface for properties which can be used to influence collada writing. More...

class	ICollisionCallback
	Callback interface for catching events of collisions. More...

class	IDummyTransformationSceneNode
	Dummy scene node for adding additional transformations to the scene graph. More...

class	IDynamicMeshBuffer

class	IGeometryCreator
	Helper class for creating geometry on the fly. More...

class	IIndexBuffer

class	ILightManager
	ILightManager provides an interface for user applications to manipulate the list of lights in the scene. More...

class	ILightSceneNode
	Scene node which is a dynamic light. More...

class	IMesh
	Class which holds the geometry of an object. More...

class	IMeshBuffer
	Class for holding a mesh with a single material. More...

class	IMeshCache
	The mesh cache stores already loaded meshes and provides an interface to them. More...

class	IMeshLoader
	Class which is able to load an animated mesh from a file. More...

class	IMeshManipulator
	An interface for easy manipulation of meshes. More...

class	IMeshSceneNode
	A scene node displaying a static mesh. More...

class	IMeshTextureLoader
	Finding and loading textures inside meshloaders. More...

class	IMeshWriter
	Interface for writing meshes. More...

class	IMetaTriangleSelector
	Interface for making multiple triangle selectors work as one big selector. More...

class	IOctreeSceneNode
	A scene node displaying a static mesh. More...

class	IParticleAffector
	A particle affector modifies particles. More...

class	IParticleAnimatedMeshSceneNodeEmitter
	A particle emitter which emits particles from mesh vertices. More...

class	IParticleAttractionAffector
	A particle affector which attracts or detracts particles. More...

class	IParticleBoxEmitter
	A particle emitter which emits particles from a box shaped space. More...

class	IParticleCylinderEmitter
	A particle emitter which emits from a cylindrically shaped space. More...

class	IParticleEmitter
	A particle emitter for using with particle systems. More...

class	IParticleFadeOutAffector
	A particle affector which fades out the particles. More...

class	IParticleGravityAffector
	A particle affector which applies gravity to particles. More...

class	IParticleMeshEmitter
	A particle emitter which emits from vertices of a mesh. More...

class	IParticleRingEmitter
	A particle emitter which emits particles along a ring shaped area. More...

class	IParticleRotationAffector
	A particle affector which rotates the particle system. More...

class	IParticleSphereEmitter
	A particle emitter which emits from a spherical space. More...

class	IParticleSystemSceneNode

class	IQ3LevelMesh
	Interface for a Mesh which can be loaded directly from a Quake3 .bsp-file. More...

class	ISceneCollisionManager
	The Scene Collision Manager provides methods for performing collision tests and picking on scene nodes. More...

class	ISceneLoader
	Class which can load a scene into the scene manager. More...

class	ISceneManager
	The Scene Manager manages scene nodes, mesh resources, cameras and all the other stuff. More...

class	ISceneNode
	Scene node interface. More...

class	ISceneNodeAnimator
	Animates a scene node. Can animate position, rotation, material, and so on. More...

class	ISceneNodeAnimatorCameraFPS
	Special scene node animator for FPS cameras. More...

class	ISceneNodeAnimatorCameraMaya
	Special scene node animator for Maya-style cameras. More...

class	ISceneNodeAnimatorCollisionResponse
	Special scene node animator for doing automatic collision detection and response. More...

class	ISceneNodeAnimatorFactory
	Interface for dynamic creation of scene node animators. More...

class	ISceneNodeFactory
	Interface for dynamic creation of scene nodes. More...

class	ISceneUserDataSerializer
	Interface to read and write user data to and from .irr files. More...

class	IShadowVolumeSceneNode
	Scene node for rendering a shadow volume into a stencil buffer. More...

class	ISkinnedMesh
	Interface for using some special functions of Skinned meshes. More...

class	ITerrainSceneNode
	A scene node for displaying terrain using the geo mip map algorithm. More...

class	ITextSceneNode
	A scene node for displaying 2d text at a position in three dimensional space. More...

class	ITriangleSelector
	Interface to return triangles with specific properties. More...

class	IVertexBuffer

class	IVertexManipulator
	Interface for vertex manipulators. More...

class	IVolumeLightSceneNode

class	SAnimatedMesh
	Simple implementation of the IAnimatedMesh interface. More...

class	SCollisionHit

class	SCollisionTriangleRange
	Additional information about the triangle arrays returned by ITriangleSelector::getTriangles. More...

class	SMD3AnimationInfo

class	SMD3Face
	Triangle Index. More...

class	SMD3Header
	this holds the header info of the MD3 file More...

class	SMD3Mesh
	Holding Frames Buffers and Tag Infos. More...

class	SMD3MeshBuffer
	Holding Frame Data for a Mesh. More...

class	SMD3MeshHeader
	this holds the header info of an MD3 mesh section More...

class	SMD3QuaternionTag
	hold a tag info for connecting meshes More...

class	SMD3QuaternionTagList
	holds a associative list of named quaternions More...

class	SMD3TexCoord
	Texture Coordinate. More...

class	SMD3Vertex
	Compressed Vertex Data. More...

class	SMesh
	Simple implementation of the IMesh interface. More...

class	SParticle
	Class for holding particle data. More...

class	SSharedMeshBuffer
	Implementation of the IMeshBuffer interface with shared vertex list. More...

class	SSkinMeshBuffer
	A mesh buffer able to choose between S3DVertex2TCoords, S3DVertex and S3DVertexTangents at runtime. More...

class	SVertexColorBrightnessManipulator
	Vertex manipulator which adjusts the brightness by the given amount. More...

class	SVertexColorContrastBrightnessManipulator
	Vertex manipulator which adjusts the contrast by the given factor and brightness by a signed amount. More...

class	SVertexColorContrastManipulator
	Vertex manipulator which adjusts the contrast by the given factor. More...

class	SVertexColorDesaturateToAverageManipulator
	Vertex manipulator which desaturates the color values. More...

class	SVertexColorDesaturateToLightnessManipulator
	Vertex manipulator which desaturates the color values. More...

class	SVertexColorDesaturateToLuminanceManipulator
	Vertex manipulator which desaturates the color values. More...

class	SVertexColorGammaManipulator
	Vertex manipulator which adjusts the brightness by a gamma operation. More...

class	SVertexColorInterpolateLinearManipulator
	Vertex manipulator which interpolates the color values. More...

class	SVertexColorInterpolateQuadraticManipulator
	Vertex manipulator which interpolates the color values. More...

class	SVertexColorInvertManipulator
	Vertex manipulator which inverts the RGB values. More...

class	SVertexColorScaleManipulator
	Vertex manipulator which scales the color values. More...

class	SVertexColorSetAlphaManipulator
	Vertex manipulator to set the alpha value of the vertex color to a fixed value. More...

class	SVertexColorSetManipulator
	Vertex manipulator to set color to a fixed color for all vertices. More...

class	SVertexColorThresholdManipulator
	Vertex manipulator to set vertex color to one of two values depending on a given threshold. More...

class	SVertexNormalizeNormalManipulator
	Vertex manipulator which normalizes the normal of the vertex. More...

class	SVertexNormalRotateScaleManipulator
	Vertex manipulator which transforms the normal of the vertex with the rotate/scale part of the given matrix (inner 3x3) More...

class	SVertexNormalTransformManipulator
	Vertex manipulator which transforms the normal of the vertex. More...

class	SVertexPositionScaleAlongNormalsManipulator
	Vertex manipulator which scales the position of the vertex along the normals. More...

class	SVertexPositionScaleManipulator
	Vertex manipulator which scales the position of the vertex. More...

class	SVertexPositionTransformManipulator
	Vertex manipulator which transforms the position of the vertex. More...

class	SVertexTCoordsScaleManipulator
	Vertex manipulator which scales the TCoords of the vertex. More...

class	SViewFrustum
	Defines the view frustum. That's the space visible by the camera. More...

Typedefs
using	ISceneNodeList = core::list< ISceneNode * >
	using type alias for list of scene nodes

using	ISceneNodeAnimatorList = core::list< ISceneNodeAnimator * >
	using type alias for list of scene node animators

using	IParticlePointEmitter = IParticleEmitter

using	SMeshBuffer = CMeshBuffer< video::S3DVertex >
	Standard meshbuffer.

using	SMeshBufferLightMap = CMeshBuffer< video::S3DVertex2TCoords >
	Meshbuffer with two texture coords per vertex, e.g. for lightmaps.

using	SMeshBufferTangents = CMeshBuffer< video::S3DVertexTangents >
	Meshbuffer with vertices having tangents stored, e.g. for normal mapping.

Enumerations
enum	E_INTERPOLATION_MODE { EIM_CONSTANT = 0 , EIM_LINEAR , EIM_COUNT }

enum	ESHADOWVOLUME_OPTIMIZATION { ESV_NONE , ESV_SILHOUETTE_BY_POS }

enum	E_SCENE_NODE_RENDER_PASS { ESNRP_NONE =0 , ESNRP_CAMERA =1 , ESNRP_LIGHT =2 , ESNRP_SKY_BOX =4 , ESNRP_AUTOMATIC =24 , ESNRP_SOLID =8 , ESNRP_TRANSPARENT =16 , ESNRP_TRANSPARENT_EFFECT =32 , ESNRP_SHADOW =64 , ESNRP_GUI = 128 }
	Enumeration for render passes. More...

enum	EParticleBehavior { EPB_INVISIBLE_EMITTING = 1 , EPB_INVISIBLE_AFFECTING = 2 , EPB_INVISIBLE_ANIMATING = 4 , EPB_CLEAR_ON_INVISIBLE = 8 , EPB_EMITTER_VECTOR_IGNORE_ROTATION = 16 , EPB_EMITTER_FRAME_INTERPOLATION = 32 }
	A particle system scene node for creating snow, fire, explosions, smoke... More...

enum	E_PARTICLE_EMITTER_TYPE { EPET_POINT = 0 , EPET_ANIMATED_MESH , EPET_BOX , EPET_CYLINDER , EPET_MESH , EPET_RING , EPET_SPHERE , EPET_COUNT }
	Types of built in particle emitters.

enum	E_PARTICLE_AFFECTOR_TYPE { EPAT_NONE = 0 , EPAT_ATTRACT , EPAT_FADE_OUT , EPAT_GRAVITY , EPAT_ROTATE , EPAT_SCALE , EPAT_COUNT }
	Types of built in particle affectors.

enum	EOCTREENODE_VBO { EOV_NO_VBO , EOV_USE_VBO , EOV_USE_VBO_WITH_VISIBITLY }
	Settings if/how octree scene nodes are using hardware mesh-buffers. More...

enum	EOCTREE_POLYGON_CHECKS { EOPC_BOX , EOPC_FRUSTUM }
	Kind of checks polygons of the octree scene nodes use against camera. More...

enum	E_ANIMATED_MESH_TYPE { EAMT_UNKNOWN = 0 , EAMT_MD2 , EAMT_MD3 , EAMT_OBJ , EAMT_BSP , EAMT_3DS , EAMT_MY3D , EAMT_LMTS , EAMT_CSM , EAMT_OCT , EAMT_MDL_HALFLIFE , EAMT_SKINNED , EAMT_STATIC }
	Possible types of meshes. More...

enum	ECUBE_MESH_TYPE { ECMT_1BUF_12VTX_NA , ECMT_6BUF_4VTX_NP , ECMT_1BUF_24VTX_NP , ECMT_COUNT }

enum	E_COLLADA_TECHNIQUE_FX { ECTF_BLINN , ECTF_PHONG , ECTF_LAMBERT , ECTF_CONSTANT }
	Lighting models - more or less the way Collada categorizes materials. More...

enum	E_COLLADA_TRANSPARENT_FX { ECOF_A_ONE = 0 , ECOF_RGB_ZERO = 1 }
	How to interpret the opacity in collada. More...

enum	E_COLLADA_COLOR_SAMPLER { ECCS_DIFFUSE , ECCS_AMBIENT , ECCS_EMISSIVE , ECCS_SPECULAR , ECCS_TRANSPARENT , ECCS_REFLECTIVE }
	Color names collada uses in it's color samplers.

enum	E_COLLADA_JPP_COLOR { ECIC_NONE , ECIC_CUSTOM , ECIC_DIFFUSE , ECIC_AMBIENT , ECIC_EMISSIVE , ECIC_SPECULAR }
	Jimcpp colors which can be mapped to E_COLLADA_COLOR_SAMPLER values. More...

enum	E_COLLADA_GEOMETRY_WRITING { ECGI_PER_MESH , ECGI_PER_MESH_AND_MATERIAL }
	Control when geometry elements are created. More...

enum	E_BONE_ANIMATION_MODE { EBAM_AUTOMATIC =0 , EBAM_ANIMATED , EBAM_UNANIMATED , EBAM_COUNT }
	Enumeration for different bone animation modes. More...

enum	E_BONE_SKINNING_SPACE { EBSS_LOCAL =0 , EBSS_GLOBAL , EBSS_COUNT }

enum	E_JOINT_UPDATE_ON_RENDER { EJUOR_NONE = 0 , EJUOR_READ , EJUOR_CONTROL }

enum	eMD3Models { EMD3_HEAD = 0 , EMD3_UPPER , EMD3_LOWER , EMD3_WEAPON , EMD3_NUMMODELS }

enum	EMD3_ANIMATION_TYPE { EMD3_BOTH_DEATH_1 = 0 , EMD3_BOTH_DEAD_1 , EMD3_BOTH_DEATH_2 , EMD3_BOTH_DEAD_2 , EMD3_BOTH_DEATH_3 , EMD3_BOTH_DEAD_3 , EMD3_TORSO_GESTURE , EMD3_TORSO_ATTACK_1 , EMD3_TORSO_ATTACK_2 , EMD3_TORSO_DROP , EMD3_TORSO_RAISE , EMD3_TORSO_STAND_1 , EMD3_TORSO_STAND_2 , EMD3_LEGS_WALK_CROUCH , EMD3_LEGS_WALK , EMD3_LEGS_RUN , EMD3_LEGS_BACK , EMD3_LEGS_SWIM , EMD3_LEGS_JUMP_1 , EMD3_LEGS_LAND_1 , EMD3_LEGS_JUMP_2 , EMD3_LEGS_LAND_2 , EMD3_LEGS_IDLE , EMD3_LEGS_IDLE_CROUCH , EMD3_LEGS_TURN , EMD3_ANIMATION_COUNT }
	Animation list. More...

enum	EMD2_ANIMATION_TYPE { EMAT_STAND = 0 , EMAT_RUN , EMAT_ATTACK , EMAT_PAIN_A , EMAT_PAIN_B , EMAT_PAIN_C , EMAT_JUMP , EMAT_FLIP , EMAT_SALUTE , EMAT_FALLBACK , EMAT_WAVE , EMAT_POINT , EMAT_CROUCH_STAND , EMAT_CROUCH_WALK , EMAT_CROUCH_ATTACK , EMAT_CROUCH_PAIN , EMAT_CROUCH_DEATH , EMAT_DEATH_FALLBACK , EMAT_DEATH_FALLFORWARD , EMAT_DEATH_FALLBACKSLOW , EMAT_BOOM , EMAT_COUNT }
	Types of standard md2 animations. More...

enum	E_TERRAIN_PATCH_SIZE { ETPS_9 = 9 , ETPS_17 = 17 , ETPS_33 = 33 , ETPS_65 = 65 , ETPS_129 = 129 }
	enumeration for patch sizes specifying the size of patches in the TerrainSceneNode More...

enum	ESCENE_NODE_UPDATE_ABS { ESNUA_TRANSFORM_MATRIX , ESNUA_TRANSFORM_POSITION }
	Options how ISceneNode::updateAbsolutePosition calculates the AbsoluteTransformation. More...

enum	ESCENE_NODE_TYPE { ESNT_SCENE_MANAGER = MAKE_JPP_ID('s','m','n','g') , ESNT_CUBE = MAKE_JPP_ID('c','u','b','e') , ESNT_SPHERE = MAKE_JPP_ID('s','p','h','r') , ESNT_TEXT = MAKE_JPP_ID('t','e','x','t') , ESNT_BILLBOARD_TEXT = MAKE_JPP_ID('b','t','x','t') , ESNT_WATER_SURFACE = MAKE_JPP_ID('w','a','t','r') , ESNT_TERRAIN = MAKE_JPP_ID('t','e','r','r') , ESNT_SKY_BOX = MAKE_JPP_ID('s','k','y','_') , ESNT_SKY_DOME = MAKE_JPP_ID('s','k','y','d') , ESNT_SHADOW_VOLUME = MAKE_JPP_ID('s','h','d','w') , ESNT_OCTREE = MAKE_JPP_ID('o','c','t','r') , ESNT_MESH = MAKE_JPP_ID('m','e','s','h') , ESNT_LIGHT = MAKE_JPP_ID('l','g','h','t') , ESNT_EMPTY = MAKE_JPP_ID('e','m','t','y') , ESNT_DUMMY_TRANSFORMATION = MAKE_JPP_ID('d','m','m','y') , ESNT_CAMERA = MAKE_JPP_ID('c','a','m','_') , ESNT_BILLBOARD = MAKE_JPP_ID('b','i','l','l') , ESNT_ANIMATED_MESH = MAKE_JPP_ID('a','m','s','h') , ESNT_PARTICLE_SYSTEM = MAKE_JPP_ID('p','t','c','l') , ESNT_Q3SHADER_SCENE_NODE = MAKE_JPP_ID('q','3','s','h') , ESNT_MD3_SCENE_NODE = MAKE_JPP_ID('m','d','3','_') , ESNT_VOLUME_LIGHT = MAKE_JPP_ID('v','o','l','l') , ESNT_CAMERA_MAYA = MAKE_JPP_ID('c','a','m','M') , ESNT_CAMERA_FPS = MAKE_JPP_ID('c','a','m','F') , ESNT_UNKNOWN = MAKE_JPP_ID('u','n','k','n') , ESNT_ANY = MAKE_JPP_ID('a','n','y','_') }
	An enumeration for all types of built-in scene nodes. More...

enum	ESCENE_NODE_ANIMATOR_TYPE { ESNAT_FLY_CIRCLE = 0 , ESNAT_FLY_STRAIGHT , ESNAT_FOLLOW_SPLINE , ESNAT_ROTATION , ESNAT_TEXTURE , ESNAT_DELETION , ESNAT_COLLISION_RESPONSE , ESNAT_CAMERA_FPS , ESNAT_CAMERA_MAYA , ESNAT_COUNT , ESNAT_UNKNOWN , ESNAT_FORCE_32_BIT = 0x7fffffff }
	An enumeration for all types of built-in scene node animators. More...

enum	E_PRIMITIVE_TYPE { EPT_POINTS =0 , EPT_LINE_STRIP , EPT_LINE_LOOP , EPT_LINES , EPT_TRIANGLE_STRIP , EPT_TRIANGLE_FAN , EPT_TRIANGLES , EPT_QUAD_STRIP , EPT_QUADS , EPT_POLYGON , EPT_POINT_SPRITES }
	Enumeration for all primitive types there are. More...

enum	EMESH_WRITER_TYPE { EMWT_IRR_MESH = MAKE_JPP_ID('i','r','r','m') , EMWT_COLLADA = MAKE_JPP_ID('c','o','l','l') , EMWT_STL = MAKE_JPP_ID('s','t','l',0) , EMWT_OBJ = MAKE_JPP_ID('o','b','j',0) , EMWT_PLY = MAKE_JPP_ID('p','l','y',0) , EMWT_B3D = MAKE_JPP_ID('b', '3', 'd', 0) }
	An enumeration for all supported types of built-in mesh writers. More...

enum	E_MESH_WRITER_FLAGS { EMWF_NONE = 0 , EMWF_WRITE_LIGHTMAPS = 0x1 , EMWF_WRITE_COMPRESSED = 0x2 , EMWF_WRITE_BINARY = 0x4 }
	flags configuring mesh writing More...

enum	EMESH_BUFFER_TYPE { EMBT_STANDARD = MAKE_JPP_ID('s','t','a','n') , EMBT_LIGHTMAP = MAKE_JPP_ID('l','i','g','h') , EMBT_TANGENTS = MAKE_JPP_ID('t','a','n','g') , EMBT_DYNAMIC = MAKE_JPP_ID('d','y','n','a') , EMBT_SHARED = MAKE_JPP_ID('s','h','a','r') , EMBT_SKIN = MAKE_JPP_ID('s','k','i','n') , EMBT_UNKNOWN = MAKE_JPP_ID('u','n','k','n') }
	An enumeration for all types of built-in mesh buffers. More...

enum	E_HARDWARE_MAPPING { EHM_NEVER =0 , EHM_STATIC , EHM_DYNAMIC , EHM_STREAM }

enum	E_BUFFER_TYPE { EBT_NONE =0 , EBT_VERTEX , EBT_INDEX , EBT_VERTEX_AND_INDEX }

enum	E_DEBUG_SCENE_TYPE { EDS_OFF = 0 , EDS_BBOX = 1 , EDS_NORMALS = 2 , EDS_SKELETON = 4 , EDS_MESH_WIRE_OVERLAY = 8 , EDS_HALF_TRANSPARENCY = 16 , EDS_BBOX_BUFFERS = 32 , EDS_BBOX_ALL = EDS_BBOX \| EDS_BBOX_BUFFERS , EDS_FULL = 0xffffffff }
	An enumeration for all types of debug data for built-in scene nodes (flags) More...

enum	E_CULLING_TYPE { EAC_OFF = 0 , EAC_BOX = 1 , EAC_FRUSTUM_BOX = 2 , EAC_FRUSTUM_SPHERE = 4 , EAC_OCC_QUERY = 8 }
	An enumeration for all types of automatic culling for built-in scene nodes.

Variables
const c8 *const	ALLOW_ZWRITE_ON_TRANSPARENT = "Allow_ZWrite_On_Transparent"
	Name of the parameter for changing how Jimcpp handles the ZWrite flag for transparent (blending) materials.

const c8 *const	CSM_TEXTURE_PATH = "CSM_TexturePath"
	Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

const c8 *const	LMTS_TEXTURE_PATH = "LMTS_TexturePath"
	Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

const c8 *const	MY3D_TEXTURE_PATH = "MY3D_TexturePath"
	Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

const c8 *const	COLLADA_CREATE_SCENE_INSTANCES = "COLLADA_CreateSceneInstances"
	Name of the parameter specifying the COLLADA mesh loading mode.

const c8 *const	DMF_TEXTURE_PATH = "DMF_TexturePath"
	Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

const c8 *const	DMF_IGNORE_MATERIALS_DIRS = "DMF_IgnoreMaterialsDir"
	Name of the parameter for preserving DMF textures dir class with built-in DMF loader.

const c8 *const	DMF_ALPHA_CHANNEL_REF = "DMF_AlphaRef"
	Name of the parameter for setting reference value of alpha in transparent materials.

const c8 *const	DMF_FLIP_ALPHA_TEXTURES = "DMF_FlipAlpha"
	Name of the parameter for choose to flip or not tga files.

const c8 *const	OBJ_TEXTURE_PATH = "OBJ_TexturePath"
	Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

const c8 *const	OBJ_LOADER_IGNORE_GROUPS = "OBJ_IgnoreGroups"
	Flag to avoid loading group classes in .obj files.

const c8 *const	OBJ_LOADER_IGNORE_MATERIAL_FILES = "OBJ_IgnoreMaterialFiles"
	Flag to avoid loading material .mtl file for .obj files.

const c8 *const	B3D_LOADER_IGNORE_MIPMAP_FLAG = "B3D_IgnoreMipmapFlag"
	Flag to ignore the b3d file's mipmapping flag.

const c8 *const	B3D_TEXTURE_PATH = "B3D_TexturePath"
	Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

const c8 *const	JPP_SCENE_MANAGER_IS_EDITOR = "JPP_Editor"
	Flag set as parameter when the scene manager is used as editor.

const c8 *const	DEBUG_NORMAL_LENGTH = "DEBUG_Normal_Length"
	Name of the parameter for setting the length of debug normals.

const c8 *const	DEBUG_NORMAL_COLOR = "DEBUG_Normal_Color"
	Name of the parameter for setting the color of debug normals.

const c8 *const	ParticleEmitterTypeNames []
	Names for built in particle emitters.

const c8 *const	ParticleAffectorTypeNames []
	Names for built in particle affectors.

const c8 *const	CubeMeshTypeNames [ECMT_COUNT+1]
	Names for ECUBE_MESH_TYPE.

const c8 *const	BoneAnimationModeNames []
	Names for bone animation modes.

class jpp::scene::SMD3Header	PACK_CLASS

const c8 *const	SceneNodeUpdateAbsNames []
	Names for culling type.

const c8 *const	AutomaticCullingNames []
	Names for culling type.

Detailed Description

All scene management can be found in this namespace: Mesh loading, special scene nodes like octrees and billboards, ...

Enumeration Type Documentation

◆ E_ANIMATED_MESH_TYPE

enum jpp::scene::E_ANIMATED_MESH_TYPE

Possible types of meshes.

Enumerator
EAMT_UNKNOWN	Unknown animated mesh type.
EAMT_MD2	Quake 2 MD2 model file.
EAMT_MD3	Quake 3 MD3 model file.
EAMT_OBJ	Maya .obj static model.
EAMT_BSP	Quake 3 .bsp static Map.
EAMT_3DS	3D Studio .3ds file
EAMT_MY3D	My3D Mesh, the file format by Zhuck Dimitry.
EAMT_LMTS	Pulsar LMTools .lmts file. This Jimcpp loader was written by Jonas Petersen.
EAMT_CSM	Cartography Shop .csm file. This loader was created by Saurav Mohapatra.
EAMT_OCT	.oct file for Paul Nette's FSRad or from Murphy McCauley's Blender .oct exporter. The oct file format contains 3D geometry and lightmaps and can be loaded directly by Jimcpp
EAMT_MDL_HALFLIFE	Halflife MDL model file.
EAMT_SKINNED	generic skinned mesh
EAMT_STATIC	generic non-animated mesh

◆ E_BONE_ANIMATION_MODE

enum jpp::scene::E_BONE_ANIMATION_MODE

Enumeration for different bone animation modes.

Enumerator
EBAM_AUTOMATIC	The bone is usually animated, unless it's parent is not animated.
EBAM_ANIMATED	The bone is animated by the skin, if it's parent is not animated then animation will resume from this bone onward.
EBAM_UNANIMATED	The bone is not animated by the skin.
EBAM_COUNT	Not an animation mode, just here to count the available modes.

◆ E_BONE_SKINNING_SPACE

enum jpp::scene::E_BONE_SKINNING_SPACE

Enumerator
EBSS_LOCAL	local skinning, standard
EBSS_GLOBAL	global skinning

◆ E_BUFFER_TYPE

enum jpp::scene::E_BUFFER_TYPE

Enumerator
EBT_NONE	Does not change anything.
EBT_VERTEX	Change the vertex mapping.
EBT_INDEX	Change the index mapping.
EBT_VERTEX_AND_INDEX	Change both vertex and index mapping to the same value.

◆ E_COLLADA_GEOMETRY_WRITING

enum jpp::scene::E_COLLADA_GEOMETRY_WRITING

Control when geometry elements are created.

Enumerator
ECGI_PER_MESH	Default - write each mesh exactly once to collada. Optimal but will not work with many tools.
ECGI_PER_MESH_AND_MATERIAL	Write each mesh as often as it's used with different materials-names in the scene. Material names which are used here are created on export, so using the IColladaMeshWriterNames interface you have some control over how many geometries are written.

◆ E_COLLADA_JPP_COLOR

enum jpp::scene::E_COLLADA_JPP_COLOR

Jimcpp colors which can be mapped to E_COLLADA_COLOR_SAMPLER values.

Enumerator
ECIC_NONE	Don't write this element at all.
ECIC_CUSTOM	Check IColladaMeshWriterProperties for custom color.
ECIC_DIFFUSE	Use SMaterial::DiffuseColor.
ECIC_AMBIENT	Use SMaterial::AmbientColor.
ECIC_EMISSIVE	Use SMaterial::EmissiveColor.
ECIC_SPECULAR	Use SMaterial::SpecularColor.

◆ E_COLLADA_TECHNIQUE_FX

enum jpp::scene::E_COLLADA_TECHNIQUE_FX

Lighting models - more or less the way Collada categorizes materials.

Enumerator
ECTF_BLINN	Blinn-phong which is default for opengl and dx fixed function pipelines. But several well-known renderers don't support it and prefer phong.
ECTF_PHONG	Phong shading, default in many external renderers.
ECTF_LAMBERT	diffuse shaded surface that is independent of lighting.

◆ E_COLLADA_TRANSPARENT_FX

enum jpp::scene::E_COLLADA_TRANSPARENT_FX

How to interpret the opacity in collada.

Enumerator
ECOF_A_ONE	default - only alpha channel of color or texture is used.
ECOF_RGB_ZERO	Alpha values for each RGB channel of color or texture are used.

◆ E_DEBUG_SCENE_TYPE

enum jpp::scene::E_DEBUG_SCENE_TYPE

An enumeration for all types of debug data for built-in scene nodes (flags)

Enumerator
EDS_OFF	No Debug Data ( Default )
EDS_BBOX	Show Bounding Boxes of SceneNode.
EDS_NORMALS	Show Vertex Normals.
EDS_SKELETON	Shows Skeleton/Tags.
EDS_MESH_WIRE_OVERLAY	Overlays Mesh Wireframe.
EDS_HALF_TRANSPARENCY	Temporary use transparency Material Type.
EDS_BBOX_BUFFERS	Show Bounding Boxes of all MeshBuffers.
EDS_BBOX_ALL	EDS_BBOX \| EDS_BBOX_BUFFERS.
EDS_FULL	Show all debug infos.

◆ E_HARDWARE_MAPPING

enum jpp::scene::E_HARDWARE_MAPPING

Enumerator
EHM_NEVER	Don't store on the hardware.
EHM_STATIC	Rarely changed, usually stored completely on the hardware.
EHM_DYNAMIC	Sometimes changed, driver optimized placement.
EHM_STREAM	Always changed, cache optimizing on the GPU.

◆ E_INTERPOLATION_MODE

enum jpp::scene::E_INTERPOLATION_MODE

Enumerator
EIM_COUNT	count of all available interpolation modes

◆ E_JOINT_UPDATE_ON_RENDER

enum jpp::scene::E_JOINT_UPDATE_ON_RENDER

Enumerator
EJUOR_NONE	do nothing
EJUOR_READ	get joints positions from the mesh (for attached nodes, etc)
EJUOR_CONTROL	control joint positions in the mesh (eg. ragdolls, or set the animation from animateJoints() )

◆ E_MESH_WRITER_FLAGS

enum jpp::scene::E_MESH_WRITER_FLAGS

flags configuring mesh writing

Enumerator
EMWF_NONE	no writer flags
EMWF_WRITE_LIGHTMAPS	write lightmap textures out if possible Currently not used by any Jimcpp mesh-writer
EMWF_WRITE_COMPRESSED	write in a way that consumes less disk space
EMWF_WRITE_BINARY	write in binary format rather than text

◆ E_PRIMITIVE_TYPE

enum jpp::scene::E_PRIMITIVE_TYPE

Enumeration for all primitive types there are.

Enumerator
EPT_POINTS	All vertices are non-connected points.
EPT_LINE_STRIP	All vertices form a single connected line.
EPT_LINE_LOOP	Just as LINE_STRIP, but the last and the first vertex is also connected.
EPT_LINES	Every two vertices are connected creating n/2 lines.
EPT_TRIANGLE_STRIP	After the first two vertices each vertex defines a new triangle. Always the two last and the new one form a new triangle.
EPT_TRIANGLE_FAN	After the first two vertices each vertex defines a new triangle. All around the common first vertex.
EPT_TRIANGLES	Explicitly set all vertices for each triangle.
EPT_QUAD_STRIP	After the first two vertices each further two vertices create a quad with the preceding two. Not supported by Direct3D
EPT_QUADS	Every four vertices create a quad. Not supported by Direct3D Deprecated with newer OpenGL drivers
EPT_POLYGON	Just as LINE_LOOP, but filled. Not supported by Direct3D Deprecated with newer OpenGL drivers
EPT_POINT_SPRITES	The single vertices are expanded to quad billboards on the GPU.

◆ E_SCENE_NODE_RENDER_PASS

enum jpp::scene::E_SCENE_NODE_RENDER_PASS

Enumeration for render passes.

A parameter passed to the registerNodeForRendering() method of the ISceneManager, specifying when the node wants to be drawn in relation to the other nodes. Note: Despite the numbering this is not used as bit-field.

Enumerator
ESNRP_NONE	No pass currently active.
ESNRP_CAMERA	Camera pass. The active view is set up here. The very first pass.
ESNRP_LIGHT	In this pass, lights are transformed into camera space and added to the driver.
ESNRP_SKY_BOX	This is used for sky boxes.
ESNRP_AUTOMATIC	All normal objects can use this for registering themselves. This value will never be returned by ISceneManager::getSceneNodeRenderPass(). The scene manager will determine by itself if an object is transparent or solid and register the object as ESNRT_TRANSPARENT or ESNRP_SOLID automatically if you call registerNodeForRendering with this value (which is default). Note that it will register the node only as ONE type. If your scene node has both solid and transparent material types register it twice (one time as ESNRP_SOLID, the other time as ESNRT_TRANSPARENT) and in the render() method call getSceneNodeRenderPass() to find out the current render pass and render only the corresponding parts of the node.
ESNRP_SOLID	Solid scene nodes or special scene nodes without materials.
ESNRP_TRANSPARENT	Transparent scene nodes, drawn after solid nodes. They are sorted from back to front and drawn in that order.
ESNRP_TRANSPARENT_EFFECT	Transparent effect scene nodes, drawn after Transparent nodes. They are sorted from back to front and drawn in that order.
ESNRP_SHADOW	Drawn after the solid nodes, before the transparent nodes, the time for drawing shadow volumes.
ESNRP_GUI	Drawn after transparent effect nodes. For custom gui's. Unsorted (in order nodes registered themselves).

◆ E_TERRAIN_PATCH_SIZE

enum jpp::scene::E_TERRAIN_PATCH_SIZE

enumeration for patch sizes specifying the size of patches in the TerrainSceneNode

Enumerator
ETPS_9	patch size of 9, at most, use 4 levels of detail with this patch size.
ETPS_17	patch size of 17, at most, use 5 levels of detail with this patch size.
ETPS_33	patch size of 33, at most, use 6 levels of detail with this patch size.
ETPS_65	patch size of 65, at most, use 7 levels of detail with this patch size.
ETPS_129	patch size of 129, at most, use 8 levels of detail with this patch size.

◆ ECUBE_MESH_TYPE

enum jpp::scene::ECUBE_MESH_TYPE

Enumerator
ECMT_1BUF_12VTX_NA	Single buffer with 12 different vertices, normals are average of adjacent planes Order for outgoing (front-face) normals of planes would be: NEG_Z, POS_X, POS_Z, NEG_X, POS_Y, NEG_Y This was the only available type before Jimcpp 1.9, so it's still the default in some functions. It has the least vertices, but is pretty much unusable if you have dynamic light
ECMT_6BUF_4VTX_NP	One buffer per side, each with 4 vertices, normals are perpendicular to sides You can use this one if you need different texture on each cube side
ECMT_1BUF_24VTX_NP	Single buffer with 24 different vertices, normals are perpendicular to sides.
ECMT_COUNT	not used, counts the number of enumerated types

◆ EMD2_ANIMATION_TYPE

enum jpp::scene::EMD2_ANIMATION_TYPE

Types of standard md2 animations.

Enumerator
EMAT_COUNT	Not an animation, but amount of animation types.

◆ EMD3_ANIMATION_TYPE

enum jpp::scene::EMD3_ANIMATION_TYPE

Animation list.

Enumerator
EMD3_ANIMATION_COUNT	Not an animation, but amount of animation types.

◆ EMESH_BUFFER_TYPE

enum jpp::scene::EMESH_BUFFER_TYPE

An enumeration for all types of built-in mesh buffers.

Types are represented by a four character code instead of simple numbers (easier to add external classes).

Enumerator
EMBT_STANDARD	SMeshBuffer (16 bit buffers)
EMBT_LIGHTMAP	SMeshBufferLightMap (16 bit buffers)
EMBT_TANGENTS	SMeshBufferTangents (16 bit buffers)
EMBT_DYNAMIC	CDynamicMeshBuffer (16 or 32 bit buffers)
EMBT_UNKNOWN	Unknown class type.

◆ EMESH_WRITER_TYPE

enum jpp::scene::EMESH_WRITER_TYPE

An enumeration for all supported types of built-in mesh writers.

A scene mesh writers is represented by a four character code such as 'irrm' or 'coll' instead of simple numbers, to avoid name clashes with external mesh writers.

Enumerator
EMWT_IRR_MESH	Irrlicht native mesh writer, for static .irrmesh files.
EMWT_COLLADA	COLLADA mesh writer for .dae and .xml files.
EMWT_STL	STL mesh writer for .stl files.
EMWT_OBJ	OBJ mesh writer for .obj files.
EMWT_PLY	PLY mesh writer for .ply files.
EMWT_B3D	B3D mesh writer, for static .b3d files.

◆ EOCTREE_POLYGON_CHECKS

enum jpp::scene::EOCTREE_POLYGON_CHECKS

Kind of checks polygons of the octree scene nodes use against camera.

Enumerator
EOPC_BOX	Check against box of the camera frustum This is the default
EOPC_FRUSTUM	against the camera frustum

◆ EOCTREENODE_VBO

enum jpp::scene::EOCTREENODE_VBO

Settings if/how octree scene nodes are using hardware mesh-buffers.

VBO = Vertex buffer object = meshbuffers bound on the graphic-card instead of uploaded each frame. It can not be generally said which mode is optimal for drawing as this depends on the scene. So you have to try and experiment for your meshes which one works best.

Enumerator
EOV_NO_VBO	No VBO's used. Vertices+indices send to graphic-card on each render.
EOV_USE_VBO	VBO's used. Draw the complete meshbuffers if any polygon in it is visible. This allows VBO's for the meshbuffers to be completely static, but basically means the octree is not used as an octree (not it still does do all the octree calculations) Might work in very specific cases, but if this is gives you the best fastest results you should probably compare as well to simply using a static mesh with no octree at all. In most cases the other 2 options should work better with an octree.
EOV_USE_VBO_WITH_VISIBITLY	VBO's used. The index-buffer information is updated each frame with only the visible parts of a tree-node. So the vertex-buffer is static and the index-buffer is dynamic. This is the default

◆ EParticleBehavior

enum jpp::scene::EParticleBehavior

A particle system scene node for creating snow, fire, explosions, smoke...

A scene node controlling a particle System. The behavior of the particles can be controlled by setting the right particle emitters and affectors. You can for example easily create a campfire by doing this:

scene::IParticleSystemSceneNode* p = scenemgr->addParticleSystemSceneNode();
p->setParticleSize(core::dimension2d<f32>(20.0f, 10.0f));
scene::IParticleEmitter* em = p->createBoxEmitter(
    core::aabbox3d<f32>(-5,0,-5,5,1,5),
    core::vector3df(0.0f,0.03f,0.0f),
    40,80, video::SColor(0,255,255,255),video::SColor(0,255,255,255), 1100,2000);
p->setEmitter(em);
em->drop();
scene::IParticleAffector* paf = p->createFadeOutParticleAffector();
p->addAffector(paf);
paf->drop();

Bitflags to control particle behavior

Enumerator
EPB_INVISIBLE_EMITTING	Continue emitting new particles even when the node is invisible.
EPB_INVISIBLE_AFFECTING	Continue affecting particles even when the node is invisible.
EPB_INVISIBLE_ANIMATING	Continue updating particle positions or deleting them even when the node is invisible.
EPB_CLEAR_ON_INVISIBLE	Clear all particles when node gets invisible.
EPB_EMITTER_VECTOR_IGNORE_ROTATION	Particle movement direction on emitting ignores the node rotation This is mainly to allow backward compatible behavior to Jimcpp 1.8
EPB_EMITTER_FRAME_INTERPOLATION	On emitting global particles interpolate the positions randomly between the last and current node transformations. This can be set to avoid gaps caused by fast node movement or low framerates, but will be somewhat slower to calculate.

◆ ESCENE_NODE_ANIMATOR_TYPE

enum jpp::scene::ESCENE_NODE_ANIMATOR_TYPE

An enumeration for all types of built-in scene node animators.

Enumerator
ESNAT_FLY_CIRCLE	Fly circle scene node animator.
ESNAT_FLY_STRAIGHT	Fly straight scene node animator.
ESNAT_FOLLOW_SPLINE	Follow spline scene node animator.
ESNAT_ROTATION	Rotation scene node animator.
ESNAT_TEXTURE	Texture scene node animator.
ESNAT_DELETION	Deletion scene node animator.
ESNAT_COLLISION_RESPONSE	Collision response scene node animator.
ESNAT_CAMERA_FPS	FPS camera animator.
ESNAT_CAMERA_MAYA	Maya camera animator.
ESNAT_COUNT	Amount of built-in scene node animators.
ESNAT_UNKNOWN	Unknown scene node animator.
ESNAT_FORCE_32_BIT	This enum is never used, it only forces the compiler to compile this enumeration to 32 bit.

◆ ESCENE_NODE_TYPE

enum jpp::scene::ESCENE_NODE_TYPE

An enumeration for all types of built-in scene nodes.

A scene node type is represented by a four character code such as 'cube' or 'mesh' instead of simple numbers, to avoid name clashes with external scene nodes.

Enumerator
ESNT_SCENE_MANAGER	of type CSceneManager (note that ISceneManager is not(!) an ISceneNode)
ESNT_CUBE	simple cube scene node
ESNT_SPHERE	Sphere scene node.
ESNT_TEXT	Text Scene Node.
ESNT_BILLBOARD_TEXT	Billboard text scene node.
ESNT_WATER_SURFACE	Water Surface Scene Node.
ESNT_TERRAIN	Terrain Scene Node.
ESNT_SKY_BOX	Sky Box Scene Node.
ESNT_SKY_DOME	Sky Dome Scene Node.
ESNT_SHADOW_VOLUME	Shadow Volume Scene Node.
ESNT_OCTREE	Octree Scene Node.
ESNT_MESH	Mesh Scene Node.
ESNT_LIGHT	Light Scene Node.
ESNT_EMPTY	Empty Scene Node.
ESNT_DUMMY_TRANSFORMATION	Dummy Transformation Scene Node.
ESNT_CAMERA	Camera Scene Node.
ESNT_BILLBOARD	Billboard Scene Node.
ESNT_ANIMATED_MESH	Animated Mesh Scene Node.
ESNT_PARTICLE_SYSTEM	Particle System Scene Node.
ESNT_Q3SHADER_SCENE_NODE	Quake3 Shader Scene Node.
ESNT_MD3_SCENE_NODE	Quake3 Model Scene Node ( has tag to link to )
ESNT_VOLUME_LIGHT	Volume Light Scene Node.
ESNT_CAMERA_MAYA	Maya Camera Scene Node. Legacy, for loading version <= 1.4.x .irr files
ESNT_CAMERA_FPS	First Person Shooter Camera. Legacy, for loading version <= 1.4.x .irr files
ESNT_UNKNOWN	Unknown scene node.
ESNT_ANY	Will match with any scene node when checking types.

◆ ESCENE_NODE_UPDATE_ABS

enum jpp::scene::ESCENE_NODE_UPDATE_ABS

Options how ISceneNode::updateAbsolutePosition calculates the AbsoluteTransformation.

Enumerator
ESNUA_TRANSFORM_MATRIX	Node and parent transformation matrices are multiplied (default)
ESNUA_TRANSFORM_POSITION	Only transform the position of the node transformation matrix by the parent transformation matrix. Parent will not affect the rotation/scale of the node transformation.

◆ ESHADOWVOLUME_OPTIMIZATION

enum jpp::scene::ESHADOWVOLUME_OPTIMIZATION

Enumerator

ESV_NONE

Create volumes around every triangle.

ESV_SILHOUETTE_BY_POS

Create volumes only around the silhouette of the mesh.

This can reduce the number of volumes drastically, but will have an upfront-cost where it calculates adjacency of triangles. Also it will not work with all models. Basically if you see strange black shadow lines then you have a model for which it won't work. We get that information about adjacency by comparing the positions of all edges in the mesh (even if they are in different meshbuffers).

Variable Documentation

◆ ALLOW_ZWRITE_ON_TRANSPARENT

const c8* const jpp::scene::ALLOW_ZWRITE_ON_TRANSPARENT = "Allow_ZWrite_On_Transparent"

Name of the parameter for changing how Jimcpp handles the ZWrite flag for transparent (blending) materials.

The default behavior in Jimcpp is to disable writing to the z-buffer for all really transparent, i.e. blending materials. This avoids problems with intersecting faces, but can also break renderings. If transparent materials should use the SMaterial flag for ZWriteEnable just as other material types use this attribute. Use it like this:

SceneManager->getParameters()->setAttribute(scene::ALLOW_ZWRITE_ON_TRANSPARENT, true);

jpp::scene::ALLOW_ZWRITE_ON_TRANSPARENT

const c8 *const ALLOW_ZWRITE_ON_TRANSPARENT

Name of the parameter for changing how Jimcpp handles the ZWrite flag for transparent (blending) mate...

Definition SceneParameters.hpp:32

◆ AutomaticCullingNames

const c8* const jpp::scene::AutomaticCullingNames[]

Initial value:

=
    {
        "false",
        "box",          
        "frustum_box",      
        "frustum_sphere",   
        "occ_query",        
        0
    }

Names for culling type.

◆ B3D_LOADER_IGNORE_MIPMAP_FLAG

const c8* const jpp::scene::B3D_LOADER_IGNORE_MIPMAP_FLAG = "B3D_IgnoreMipmapFlag"

Flag to ignore the b3d file's mipmapping flag.

Instead Jimcpp's texture creation flag is used. Use it like this:

SceneManager->getParameters()->setAttribute(scene::B3D_LOADER_IGNORE_MIPMAP_FLAG, true);

jpp::scene::B3D_LOADER_IGNORE_MIPMAP_FLAG

const c8 *const B3D_LOADER_IGNORE_MIPMAP_FLAG

Flag to ignore the b3d file's mipmapping flag.

Definition SceneParameters.hpp:148

◆ B3D_TEXTURE_PATH

const c8* const jpp::scene::B3D_TEXTURE_PATH = "B3D_TexturePath"

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

Was used for changing the texture path of the built-in b3d loader like this:

SceneManager->getParameters()->setAttribute(scene::B3D_TEXTURE_PATH, "path/to/your/textures");

jpp::scene::B3D_TEXTURE_PATH

const c8 *const B3D_TEXTURE_PATH

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

Definition SceneParameters.hpp:156

◆ BoneAnimationModeNames

const c8* const jpp::scene::BoneAnimationModeNames[]

Initial value:

=
    {
        "automatic",
        "animated",
        "unanimated",
        0,
    }

Names for bone animation modes.

◆ COLLADA_CREATE_SCENE_INSTANCES

const c8* const jpp::scene::COLLADA_CREATE_SCENE_INSTANCES = "COLLADA_CreateSceneInstances"

Name of the parameter specifying the COLLADA mesh loading mode.

Specifies if the COLLADA loader should create instances of the models, lights and cameras when loading COLLADA meshes. By default, this is set to false. If this is set to true, the ISceneManager::getMesh() method will only return a pointer to a dummy mesh and create instances of all meshes and lights and cameras in the collada file by itself. Example:

SceneManager->getParameters()->setAttribute(scene::COLLADA_CREATE_SCENE_INSTANCES, true);

jpp::scene::COLLADA_CREATE_SCENE_INSTANCES

const c8 *const COLLADA_CREATE_SCENE_INSTANCES

Name of the parameter specifying the COLLADA mesh loading mode.

Definition SceneParameters.hpp:69

◆ CSM_TEXTURE_PATH

const c8* const jpp::scene::CSM_TEXTURE_PATH = "CSM_TexturePath"

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

Was used for changing the texture path of the built-in csm loader like this:

SceneManager->getParameters()->setAttribute(scene::CSM_TEXTURE_PATH, "path/to/your/textures");

jpp::scene::CSM_TEXTURE_PATH

const c8 *const CSM_TEXTURE_PATH

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

Definition SceneParameters.hpp:40

◆ CubeMeshTypeNames

const c8* const jpp::scene::CubeMeshTypeNames[ECMT_COUNT+1]

Initial value:

=
    {
        "1BUF_12VTX_NA",
        "ECMT_6BUF_4VTX_NP",
        "1BUF_24VTX_NP",
        0
    }

Names for ECUBE_MESH_TYPE.

◆ DEBUG_NORMAL_COLOR

const c8* const jpp::scene::DEBUG_NORMAL_COLOR = "DEBUG_Normal_Color"

Name of the parameter for setting the color of debug normals.

Use it like this:

SceneManager->getParameters()->setAttributeAsColor(scene::DEBUG_NORMAL_COLOR, video::SColor(255, 255, 255, 255));

jpp::scene::DEBUG_NORMAL_COLOR

const c8 *const DEBUG_NORMAL_COLOR

Name of the parameter for setting the color of debug normals.

Definition SceneParameters.hpp:177

◆ DEBUG_NORMAL_LENGTH

const c8* const jpp::scene::DEBUG_NORMAL_LENGTH = "DEBUG_Normal_Length"

Name of the parameter for setting the length of debug normals.

Use it like this:

SceneManager->getParameters()->setAttribute(scene::DEBUG_NORMAL_LENGTH, 1.5f);

jpp::scene::DEBUG_NORMAL_LENGTH

const c8 *const DEBUG_NORMAL_LENGTH

Name of the parameter for setting the length of debug normals.

Definition SceneParameters.hpp:169

◆ DMF_ALPHA_CHANNEL_REF

const c8* const jpp::scene::DMF_ALPHA_CHANNEL_REF = "DMF_AlphaRef"

Name of the parameter for setting reference value of alpha in transparent materials.

Use it like this:

//this way you'll set alpha ref to 0.1

SceneManager->getParameters()->setAttribute(scene::DMF_ALPHA_CHANNEL_REF, 0.1);

jpp::scene::DMF_ALPHA_CHANNEL_REF

const c8 *const DMF_ALPHA_CHANNEL_REF

Name of the parameter for setting reference value of alpha in transparent materials.

Definition SceneParameters.hpp:104

◆ DMF_FLIP_ALPHA_TEXTURES

const c8* const jpp::scene::DMF_FLIP_ALPHA_TEXTURES = "DMF_FlipAlpha"

Name of the parameter for choose to flip or not tga files.

Use it like this:

//this way you'll choose to flip alpha textures

SceneManager->getParameters()->setAttribute(scene::DMF_FLIP_ALPHA_TEXTURES, true);

jpp::scene::DMF_FLIP_ALPHA_TEXTURES

const c8 *const DMF_FLIP_ALPHA_TEXTURES

Name of the parameter for choose to flip or not tga files.

Definition SceneParameters.hpp:113

◆ DMF_IGNORE_MATERIALS_DIRS

const c8* const jpp::scene::DMF_IGNORE_MATERIALS_DIRS = "DMF_IgnoreMaterialsDir"

Name of the parameter for preserving DMF textures dir class with built-in DMF loader.

If this parameter is set to true, the texture directory defined in the Deled file is ignored, and only the texture name is used to find the proper file. Otherwise, the texture path is also used, which allows to use a nicer media layout. Use it like this:

//this way you won't use this setting (default)

SceneManager->getParameters()->setAttribute(scene::DMF_IGNORE_MATERIALS_DIRS, false);

jpp::scene::DMF_IGNORE_MATERIALS_DIRS

const c8 *const DMF_IGNORE_MATERIALS_DIRS

Name of the parameter for preserving DMF textures dir class with built-in DMF loader.

Definition SceneParameters.hpp:95

//this way you'll use this setting

SceneManager->getParameters()->setAttribute(scene::DMF_IGNORE_MATERIALS_DIRS, true);

◆ DMF_TEXTURE_PATH

const c8* const jpp::scene::DMF_TEXTURE_PATH = "DMF_TexturePath"

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

This path is prefixed to the file names defined in the Deled file when loading textures. This allows to alter the paths for a specific project setting. Use it like this:

SceneManager->getStringParameters()->setAttribute(scene::DMF_TEXTURE_PATH, "path/to/your/textures");

jpp::scene::DMF_TEXTURE_PATH

const c8 *const DMF_TEXTURE_PATH

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

Definition SceneParameters.hpp:79

◆ JPP_SCENE_MANAGER_IS_EDITOR

const c8* const jpp::scene::JPP_SCENE_MANAGER_IS_EDITOR = "JPP_Editor"

Flag set as parameter when the scene manager is used as editor.

In this way special animators like deletion animators can be stopped from deleting scene nodes for example

◆ LMTS_TEXTURE_PATH

const c8* const jpp::scene::LMTS_TEXTURE_PATH = "LMTS_TexturePath"

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

Was used for changing the texture path of the built-in lmts loader like this:

SceneManager->getParameters()->setAttribute(scene::LMTS_TEXTURE_PATH, "path/to/your/textures");

jpp::scene::LMTS_TEXTURE_PATH

const c8 *const LMTS_TEXTURE_PATH

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

Definition SceneParameters.hpp:48

◆ MY3D_TEXTURE_PATH

const c8* const jpp::scene::MY3D_TEXTURE_PATH = "MY3D_TexturePath"

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

Was used for changing the texture path of the built-in MY3D loader like this:

SceneManager->getParameters()->setAttribute(scene::MY3D_TEXTURE_PATH, "path/to/your/textures");

jpp::scene::MY3D_TEXTURE_PATH

const c8 *const MY3D_TEXTURE_PATH

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

Definition SceneParameters.hpp:56

◆ OBJ_LOADER_IGNORE_GROUPS

const c8* const jpp::scene::OBJ_LOADER_IGNORE_GROUPS = "OBJ_IgnoreGroups"

Flag to avoid loading group classes in .obj files.

Use it like this:

SceneManager->getParameters()->setAttribute(scene::OBJ_LOADER_IGNORE_GROUPS, true);

jpp::scene::OBJ_LOADER_IGNORE_GROUPS

const c8 *const OBJ_LOADER_IGNORE_GROUPS

Flag to avoid loading group classes in .obj files.

Definition SceneParameters.hpp:130

◆ OBJ_LOADER_IGNORE_MATERIAL_FILES

const c8* const jpp::scene::OBJ_LOADER_IGNORE_MATERIAL_FILES = "OBJ_IgnoreMaterialFiles"

Flag to avoid loading material .mtl file for .obj files.

Use it like this:

SceneManager->getParameters()->setAttribute(scene::OBJ_LOADER_IGNORE_MATERIAL_FILES, true);

jpp::scene::OBJ_LOADER_IGNORE_MATERIAL_FILES

const c8 *const OBJ_LOADER_IGNORE_MATERIAL_FILES

Flag to avoid loading material .mtl file for .obj files.

Definition SceneParameters.hpp:139

◆ OBJ_TEXTURE_PATH

const c8* const jpp::scene::OBJ_TEXTURE_PATH = "OBJ_TexturePath"

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

Was used for changing the texture path of the built-in obj loader like this:

SceneManager->getParameters()->setAttribute(scene::OBJ_TEXTURE_PATH, "path/to/your/textures");

jpp::scene::OBJ_TEXTURE_PATH

const c8 *const OBJ_TEXTURE_PATH

Deprecated, use IMeshLoader::getMeshTextureLoader()->setTexturePath instead.

Definition SceneParameters.hpp:122

◆ ParticleAffectorTypeNames

const c8* const jpp::scene::ParticleAffectorTypeNames[]

Initial value:

=
{
    "None",
    "Attract",
    "FadeOut",
    "Gravity",
    "Rotate",
    "Scale",
    0
}

Names for built in particle affectors.

◆ ParticleEmitterTypeNames

const c8* const jpp::scene::ParticleEmitterTypeNames[]

Initial value:

=
{
    "Point",
    "AnimatedMesh",
    "Box",
    "Cylinder",
    "Mesh",
    "Ring",
    "Sphere",
    0
}

Names for built in particle emitters.

◆ SceneNodeUpdateAbsNames

const c8* const jpp::scene::SceneNodeUpdateAbsNames[]

Initial value:

=
    {
        "matrix",
        "pos",
        0
    }

Names for culling type.

Classes

Typedefs

Enumerations

Variables

Detailed Description

Enumeration Type Documentation

◆ E_ANIMATED_MESH_TYPE

◆ E_BONE_ANIMATION_MODE

◆ E_BONE_SKINNING_SPACE

◆ E_BUFFER_TYPE

◆ E_COLLADA_GEOMETRY_WRITING

◆ E_COLLADA_JPP_COLOR

◆ E_COLLADA_TECHNIQUE_FX

◆ E_COLLADA_TRANSPARENT_FX

◆ E_DEBUG_SCENE_TYPE

◆ E_HARDWARE_MAPPING

◆ E_INTERPOLATION_MODE

◆ E_JOINT_UPDATE_ON_RENDER

◆ E_MESH_WRITER_FLAGS

◆ E_PRIMITIVE_TYPE

◆ E_SCENE_NODE_RENDER_PASS

◆ E_TERRAIN_PATCH_SIZE

◆ ECUBE_MESH_TYPE

◆ EMD2_ANIMATION_TYPE

◆ EMD3_ANIMATION_TYPE

◆ EMESH_BUFFER_TYPE

◆ EMESH_WRITER_TYPE

◆ EOCTREE_POLYGON_CHECKS

◆ EOCTREENODE_VBO

◆ EParticleBehavior

◆ ESCENE_NODE_ANIMATOR_TYPE

◆ ESCENE_NODE_TYPE

◆ ESCENE_NODE_UPDATE_ABS

◆ ESHADOWVOLUME_OPTIMIZATION

Variable Documentation

◆ ALLOW_ZWRITE_ON_TRANSPARENT

◆ AutomaticCullingNames

◆ B3D_LOADER_IGNORE_MIPMAP_FLAG

◆ B3D_TEXTURE_PATH

◆ BoneAnimationModeNames

◆ COLLADA_CREATE_SCENE_INSTANCES

◆ CSM_TEXTURE_PATH

◆ CubeMeshTypeNames

◆ DEBUG_NORMAL_COLOR

◆ DEBUG_NORMAL_LENGTH

◆ DMF_ALPHA_CHANNEL_REF

◆ DMF_FLIP_ALPHA_TEXTURES

◆ DMF_IGNORE_MATERIALS_DIRS

◆ DMF_TEXTURE_PATH

◆ JPP_SCENE_MANAGER_IS_EDITOR

◆ LMTS_TEXTURE_PATH

◆ MY3D_TEXTURE_PATH

◆ OBJ_LOADER_IGNORE_GROUPS

◆ OBJ_LOADER_IGNORE_MATERIAL_FILES

◆ OBJ_TEXTURE_PATH

◆ ParticleAffectorTypeNames

◆ ParticleEmitterTypeNames

◆ SceneNodeUpdateAbsNames