 |
Jimcpp 2.1.0
Jimcpp is a high-performance c++ graphics engine.
|
|
Jimcpp 2.1.0
Jimcpp is a high-performance c++ graphics engine.
|
The Scene Manager manages scene nodes, mesh resources, cameras and all the other stuff. More...
#include <jimcpp/core/engine/ISceneManager.hpp>
Public Member Functions | |
| virtual IAnimatedMesh * | getMesh (const io::path &filename, const io::path &alternativeCacheName=io::path(""))=0 |
| Get pointer to an animateable mesh. Loads the file if not loaded already. | |
| virtual IAnimatedMesh * | getMesh (io::IReadFile *file)=0 |
| Get pointer to an animateable mesh. Loads the file if not loaded already. | |
| virtual IMeshCache * | getMeshCache ()=0 |
| Get interface to the mesh cache which is shared between all existing scene managers. | |
| virtual video::IVideoDriver * | getVideoDriver ()=0 |
| Get the video driver. | |
| virtual gui::IGUIEnvironment * | getGUIEnvironment ()=0 |
| Get the active GUIEnvironment. | |
| virtual io::IFileSystem * | getFileSystem ()=0 |
| Get the active FileSystem. | |
| virtual IVolumeLightSceneNode * | addVolumeLightSceneNode (ISceneNode *parent=0, s32 id=-1, const u32 subdivU=32, const u32 subdivV=32, const video::SColor foot=video::SColor(51, 0, 230, 180), const video::SColor tail=video::SColor(0, 0, 0, 0), const core::vector3df &position=core::vector3df(0, 0, 0), const core::vector3df &rotation=core::vector3df(0, 0, 0), const core::vector3df &scale=core::vector3df(1.0f, 1.0f, 1.0f))=0 |
| adds Volume Lighting Scene Node. | |
| virtual IMeshSceneNode * | addCubeSceneNode (f32 size=10.0f, ISceneNode *parent=0, s32 id=-1, const core::vector3df &position=core::vector3df(0, 0, 0), const core::vector3df &rotation=core::vector3df(0, 0, 0), const core::vector3df &scale=core::vector3df(1.0f, 1.0f, 1.0f), ECUBE_MESH_TYPE type=ECMT_1BUF_12VTX_NA)=0 |
| Adds a cube scene node. | |
| virtual IMeshSceneNode * | addSphereSceneNode (f32 radius=5.0f, s32 polyCount=16, ISceneNode *parent=0, s32 id=-1, const core::vector3df &position=core::vector3df(0, 0, 0), const core::vector3df &rotation=core::vector3df(0, 0, 0), const core::vector3df &scale=core::vector3df(1.0f, 1.0f, 1.0f))=0 |
| Adds a sphere scene node of the given radius and detail. | |
| virtual IAnimatedMeshSceneNode * | addAnimatedMeshSceneNode (IAnimatedMesh *mesh, ISceneNode *parent=0, s32 id=-1, const core::vector3df &position=core::vector3df(0, 0, 0), const core::vector3df &rotation=core::vector3df(0, 0, 0), const core::vector3df &scale=core::vector3df(1.0f, 1.0f, 1.0f), bool alsoAddIfMeshPointerZero=false)=0 |
| Adds a scene node for rendering an animated mesh model. | |
| virtual IMeshSceneNode * | addMeshSceneNode (IMesh *mesh, ISceneNode *parent=0, s32 id=-1, const core::vector3df &position=core::vector3df(0, 0, 0), const core::vector3df &rotation=core::vector3df(0, 0, 0), const core::vector3df &scale=core::vector3df(1.0f, 1.0f, 1.0f), bool alsoAddIfMeshPointerZero=false)=0 |
| Adds a scene node for rendering a static mesh. | |
| virtual ISceneNode * | addWaterSurfaceSceneNode (IMesh *mesh, f32 waveHeight=2.0f, f32 waveSpeed=300.0f, f32 waveLength=10.0f, ISceneNode *parent=0, s32 id=-1, const core::vector3df &position=core::vector3df(0, 0, 0), const core::vector3df &rotation=core::vector3df(0, 0, 0), const core::vector3df &scale=core::vector3df(1.0f, 1.0f, 1.0f))=0 |
| Adds a scene node for rendering a animated water surface mesh. | |
| virtual IOctreeSceneNode * | addOctreeSceneNode (IAnimatedMesh *mesh, ISceneNode *parent=0, s32 id=-1, s32 minimalPolysPerNode=512, bool alsoAddIfMeshPointerZero=false)=0 |
| Adds a scene node for rendering using a octree to the scene graph. | |
| virtual IOctreeSceneNode * | addOctreeSceneNode (IMesh *mesh, ISceneNode *parent=0, s32 id=-1, s32 minimalPolysPerNode=256, bool alsoAddIfMeshPointerZero=false)=0 |
| Adds a scene node for rendering using a octree to the scene graph. | |
| virtual ICameraSceneNode * | addCameraSceneNode (ISceneNode *parent=0, const core::vector3df &position=core::vector3df(0, 0, 0), const core::vector3df &lookat=core::vector3df(0, 0, 100), s32 id=-1, bool makeActive=true)=0 |
| Adds a camera scene node to the scene graph and sets it as active camera. | |
| virtual ICameraSceneNode * | addCameraSceneNodeMaya (ISceneNode *parent=0, f32 rotateSpeed=-1500.f, f32 zoomSpeed=200.f, f32 translationSpeed=1500.f, s32 id=-1, f32 distance=70.f, bool makeActive=true, f32 rotX=0.f, f32 rotY=0.f)=0 |
| Adds a maya style user controlled camera scene node to the scene graph. | |
| virtual ICameraSceneNode * | addCameraSceneNodeFPS (ISceneNode *parent=0, f32 rotateSpeed=100.0f, f32 moveSpeed=0.5f, s32 id=-1, SKeyMap *keyMapArray=0, s32 keyMapSize=0, bool noVerticalMovement=false, f32 jumpSpeed=0.f, bool invertMouse=false, bool makeActive=true)=0 |
| Adds a camera scene node with an animator which provides mouse and keyboard control appropriate for first person shooters (FPS). | |
| virtual ILightSceneNode * | addLightSceneNode (ISceneNode *parent=0, const core::vector3df &position=core::vector3df(0, 0, 0), video::SColorf color=video::SColorf(1.0f, 1.0f, 1.0f), f32 radius=100.0f, s32 id=-1)=0 |
| Adds a dynamic light scene node to the scene graph. | |
| virtual IBillboardSceneNode * | addBillboardSceneNode (ISceneNode *parent=0, const core::dimension2d< f32 > &size=core::dimension2d< f32 >(10.0f, 10.0f), const core::vector3df &position=core::vector3df(0, 0, 0), s32 id=-1, video::SColor colorTop=0xFFFFFFFF, video::SColor colorBottom=0xFFFFFFFF)=0 |
| Adds a billboard scene node to the scene graph. | |
| virtual ISceneNode * | addSkyBoxSceneNode (video::ITexture *top, video::ITexture *bottom, video::ITexture *left, video::ITexture *right, video::ITexture *front, video::ITexture *back, ISceneNode *parent=0, s32 id=-1)=0 |
| Adds a skybox scene node to the scene graph. | |
| virtual ISceneNode * | addSkyDomeSceneNode (video::ITexture *texture, u32 horiRes=16, u32 vertRes=8, f32 texturePercentage=0.9, f32 spherePercentage=2.0, f32 radius=1000.f, ISceneNode *parent=0, s32 id=-1)=0 |
| Adds a skydome scene node to the scene graph. | |
| virtual IParticleSystemSceneNode * | addParticleSystemSceneNode (bool withDefaultEmitter=true, ISceneNode *parent=0, s32 id=-1, const core::vector3df &position=core::vector3df(0, 0, 0), const core::vector3df &rotation=core::vector3df(0, 0, 0), const core::vector3df &scale=core::vector3df(1.0f, 1.0f, 1.0f))=0 |
| Adds a particle system scene node to the scene graph. | |
| virtual ITerrainSceneNode * | addTerrainSceneNode (const io::path &heightMapFileName, ISceneNode *parent=0, s32 id=-1, const core::vector3df &position=core::vector3df(0.0f, 0.0f, 0.0f), const core::vector3df &rotation=core::vector3df(0.0f, 0.0f, 0.0f), const core::vector3df &scale=core::vector3df(1.0f, 1.0f, 1.0f), video::SColor vertexColor=video::SColor(255, 255, 255, 255), s32 maxLOD=5, E_TERRAIN_PATCH_SIZE patchSize=ETPS_17, s32 smoothFactor=0, bool addAlsoIfHeightmapEmpty=false)=0 |
| Adds a terrain scene node to the scene graph. | |
| virtual ITerrainSceneNode * | addTerrainSceneNode (io::IReadFile *heightMapFile, ISceneNode *parent=0, s32 id=-1, const core::vector3df &position=core::vector3df(0.0f, 0.0f, 0.0f), const core::vector3df &rotation=core::vector3df(0.0f, 0.0f, 0.0f), const core::vector3df &scale=core::vector3df(1.0f, 1.0f, 1.0f), video::SColor vertexColor=video::SColor(255, 255, 255, 255), s32 maxLOD=5, E_TERRAIN_PATCH_SIZE patchSize=ETPS_17, s32 smoothFactor=0, bool addAlsoIfHeightmapEmpty=false)=0 |
| Adds a terrain scene node to the scene graph. | |
| virtual IMeshSceneNode * | addQuake3SceneNode (const IMeshBuffer *meshBuffer, const quake3::IShader *shader, ISceneNode *parent=0, s32 id=-1)=0 |
| Adds a quake3 scene node to the scene graph. | |
| virtual ISceneNode * | addEmptySceneNode (ISceneNode *parent=0, s32 id=-1)=0 |
| Adds an empty scene node to the scene graph. | |
| virtual IDummyTransformationSceneNode * | addDummyTransformationSceneNode (ISceneNode *parent=0, s32 id=-1)=0 |
| Adds a dummy transformation scene node to the scene graph. | |
| virtual ITextSceneNode * | addTextSceneNode (gui::IGUIFont *font, const wchar_t *text, video::SColor color=video::SColor(100, 255, 255, 255), ISceneNode *parent=0, const core::vector3df &position=core::vector3df(0, 0, 0), s32 id=-1)=0 |
| Adds a text scene node, which is able to display 2d text at a position in three dimensional space. | |
| virtual IBillboardTextSceneNode * | addBillboardTextSceneNode (gui::IGUIFont *font, const wchar_t *text, ISceneNode *parent=0, const core::dimension2d< f32 > &size=core::dimension2d< f32 >(10.0f, 10.0f), const core::vector3df &position=core::vector3df(0, 0, 0), s32 id=-1, video::SColor colorTop=0xFFFFFFFF, video::SColor colorBottom=0xFFFFFFFF)=0 |
| Adds a text scene node, which uses billboards. The node, and the text on it, will scale with distance. | |
| virtual IAnimatedMesh * | addHillPlaneMesh (const io::path &name, const core::dimension2d< f32 > &tileSize, const core::dimension2d< u32 > &tileCount, video::SMaterial *material=0, f32 hillHeight=0.0f, const core::dimension2d< f32 > &countHills=core::dimension2d< f32 >(0.0f, 0.0f), const core::dimension2d< f32 > &textureRepeatCount=core::dimension2d< f32 >(1.0f, 1.0f))=0 |
| Adds a Hill Plane mesh to the mesh pool. | |
| virtual IAnimatedMesh * | addTerrainMesh (const io::path &meshname, video::IImage *texture, video::IImage *heightmap, const core::dimension2d< f32 > &stretchSize=core::dimension2d< f32 >(10.0f, 10.0f), f32 maxHeight=200.0f, const core::dimension2d< u32 > &defaultVertexBlockSize=core::dimension2d< u32 >(64, 64))=0 |
| Adds a static terrain mesh to the mesh pool. | |
| virtual IAnimatedMesh * | addArrowMesh (const io::path &name, video::SColor vtxColorCylinder=0xFFFFFFFF, video::SColor vtxColorCone=0xFFFFFFFF, u32 tesselationCylinder=4, u32 tesselationCone=8, f32 height=1.f, f32 cylinderHeight=0.6f, f32 widthCylinder=0.05f, f32 widthCone=0.3f)=0 |
| add a static arrow mesh to the meshpool | |
| virtual IAnimatedMesh * | addSphereMesh (const io::path &name, f32 radius=5.f, u32 polyCountX=16, u32 polyCountY=16)=0 |
| add a static sphere mesh to the meshpool | |
| virtual IAnimatedMesh * | addVolumeLightMesh (const io::path &name, const u32 SubdivideU=32, const u32 SubdivideV=32, const video::SColor FootColor=video::SColor(51, 0, 230, 180), const video::SColor TailColor=video::SColor(0, 0, 0, 0))=0 |
| Add a volume light mesh to the meshpool. | |
| virtual ISceneNode * | getRootSceneNode ()=0 |
| Gets the root scene node. | |
| virtual ISceneNode * | getSceneNodeFromId (s32 id, ISceneNode *start=0)=0 |
| Get the first scene node with the specified id. | |
| virtual ISceneNode * | getSceneNodeFromName (const c8 *name, ISceneNode *start=0)=0 |
| Get the first scene node with the specified name. | |
| virtual ISceneNode * | getSceneNodeFromType (scene::ESCENE_NODE_TYPE type, ISceneNode *start=0)=0 |
| Get the first scene node with the specified type. | |
| virtual void | getSceneNodesFromType (ESCENE_NODE_TYPE type, core::array< scene::ISceneNode * > &outNodes, ISceneNode *start=0)=0 |
| Get scene nodes by type. | |
| virtual ICameraSceneNode * | getActiveCamera () const =0 |
| Get the current active camera. | |
| virtual void | setActiveCamera (ICameraSceneNode *camera)=0 |
| Sets the currently active camera. | |
| virtual void | setShadowColor (video::SColor color=video::SColor(150, 0, 0, 0))=0 |
| Sets the color of stencil buffers shadows drawn by the scene manager. | |
| virtual video::SColor | getShadowColor () const =0 |
| Get the current color of shadows. | |
| virtual IShadowVolumeSceneNode * | createShadowVolumeSceneNode (const IMesh *shadowMesh, ISceneNode *parent, s32 id, bool zfailmethod, f32 infinity)=0 |
| Create a shadow volume scene node to be used with custom nodes. | |
| virtual u32 | registerNodeForRendering (ISceneNode *node, E_SCENE_NODE_RENDER_PASS pass=ESNRP_AUTOMATIC)=0 |
| Registers a node for rendering it at a specific time. | |
| virtual void | clearAllRegisteredNodesForRendering ()=0 |
| Clear all nodes which are currently registered for rendering. | |
| virtual void | drawAll ()=0 |
| Draws all the scene nodes. | |
| virtual ISceneNodeAnimator * | createRotationAnimator (const core::vector3df &rotationSpeed)=0 |
| Creates a rotation animator, which rotates the attached scene node around itself. | |
| virtual ISceneNodeAnimator * | createFlyCircleAnimator (const core::vector3df ¢er=core::vector3df(0.f, 0.f, 0.f), f32 radius=100.f, f32 speed=0.001f, const core::vector3df &direction=core::vector3df(0.f, 1.f, 0.f), f32 startPosition=0.f, f32 radiusEllipsoid=0.f)=0 |
| Creates a fly circle animator, which lets the attached scene node fly around a center. | |
| virtual ISceneNodeAnimator * | createFlyStraightAnimator (const core::vector3df &startPoint, const core::vector3df &endPoint, u32 timeForWay, bool loop=false, bool pingpong=false)=0 |
| Creates a fly straight animator, which lets the attached scene node fly or move along a line between two points. | |
| virtual ISceneNodeAnimator * | createTextureAnimator (const core::array< video::ITexture * > &textures, s32 timePerFrame, bool loop=true)=0 |
| Creates a texture animator, which switches the textures of the target scene node based on a list of textures. | |
| virtual ISceneNodeAnimator * | createDeleteAnimator (u32 timeMs)=0 |
| Creates a scene node animator, which deletes the scene node after some time automatically. | |
| virtual ISceneNodeAnimatorCollisionResponse * | createCollisionResponseAnimator (ITriangleSelector *world, ISceneNode *sceneNode, const core::vector3df &ellipsoidRadius=core::vector3df(30, 60, 30), const core::vector3df &gravityPerSecond=core::vector3df(0,-10.0f, 0), const core::vector3df &ellipsoidTranslation=core::vector3df(0, 0, 0), f32 slidingValue=0.0005f)=0 |
| Creates a special scene node animator for doing automatic collision detection and response. | |
| virtual ISceneNodeAnimator * | createFollowSplineAnimator (s32 startTime, const core::array< core::vector3df > &points, f32 speed=1.0f, f32 tightness=0.5f, bool loop=true, bool pingpong=false, bool steer=false)=0 |
| Creates a follow spline animator. | |
| virtual ITriangleSelector * | createTriangleSelector (IMesh *mesh, ISceneNode *node, bool separateMeshbuffers=false)=0 |
| Creates a simple ITriangleSelector, based on a mesh. | |
| virtual ITriangleSelector * | createTriangleSelector (const IMeshBuffer *meshBuffer, jpp::u32 materialIndex, ISceneNode *node)=0 |
| Creates a simple ITriangleSelector, based on a meshbuffer. | |
| virtual ITriangleSelector * | createTriangleSelector (IAnimatedMeshSceneNode *node, bool separateMeshbuffers=false)=0 |
| Creates a simple ITriangleSelector, based on an animated mesh scene node. | |
| virtual ITriangleSelector * | createTriangleSelectorFromBoundingBox (ISceneNode *node)=0 |
| Creates a simple dynamic ITriangleSelector, based on a axis aligned bounding box. | |
| virtual ITriangleSelector * | createOctreeTriangleSelector (IMesh *mesh, ISceneNode *node, s32 minimalPolysPerNode=32)=0 |
| Creates a Triangle Selector, optimized by an octree. | |
| virtual ITriangleSelector * | createOctreeTriangleSelector (IMeshBuffer *meshBuffer, jpp::u32 materialIndex, ISceneNode *node, s32 minimalPolysPerNode=32)=0 |
| Creates a Triangle Selector for a single meshbuffer, optimized by an octree. | |
| JPP_DEPRECATED ITriangleSelector * | createOctTreeTriangleSelector (IMesh *mesh, ISceneNode *node, s32 minimalPolysPerNode=32) |
| //! Creates a Triangle Selector, optimized by an octree. | |
| virtual IMetaTriangleSelector * | createMetaTriangleSelector ()=0 |
| Creates a meta triangle selector. | |
| virtual ITriangleSelector * | createTerrainTriangleSelector (ITerrainSceneNode *node, s32 LOD=0)=0 |
| Creates a triangle selector which can select triangles from a terrain scene node. | |
| virtual void | addExternalMeshLoader (IMeshLoader *externalLoader)=0 |
| Adds an external mesh loader for extending the engine with new file formats. | |
| virtual u32 | getMeshLoaderCount () const =0 |
| Returns the number of mesh loaders supported by Jimcpp at this time. | |
| virtual IMeshLoader * | getMeshLoader (u32 index) const =0 |
| Retrieve the given mesh loader. | |
| virtual void | addExternalSceneLoader (ISceneLoader *externalLoader)=0 |
| Adds an external scene loader for extending the engine with new file formats. | |
| virtual u32 | getSceneLoaderCount () const =0 |
| Returns the number of scene loaders supported by Jimcpp at this time. | |
| virtual ISceneLoader * | getSceneLoader (u32 index) const =0 |
| Retrieve the given scene loader. | |
| virtual ISceneCollisionManager * | getSceneCollisionManager ()=0 |
| Get pointer to the scene collision manager. | |
| virtual IMeshManipulator * | getMeshManipulator ()=0 |
| Get pointer to the mesh manipulator. | |
| virtual void | addToDeletionQueue (ISceneNode *node)=0 |
| Adds a scene node to the deletion queue. | |
| virtual bool | postEventFromUser (const SEvent &event)=0 |
| Posts an input event to the environment. | |
| virtual void | clear ()=0 |
| Clears the whole scene. | |
| virtual io::IAttributes * | getParameters ()=0 |
| Get interface to the parameters set in this scene. | |
| virtual E_SCENE_NODE_RENDER_PASS | getSceneNodeRenderPass () const =0 |
| Get current render pass. | |
| virtual ISceneNodeFactory * | getDefaultSceneNodeFactory ()=0 |
| Get the default scene node factory which can create all built in scene nodes. | |
| virtual void | registerSceneNodeFactory (ISceneNodeFactory *factoryToAdd)=0 |
| Adds a scene node factory to the scene manager. | |
| virtual u32 | getRegisteredSceneNodeFactoryCount () const =0 |
| Get amount of registered scene node factories. | |
| virtual ISceneNodeFactory * | getSceneNodeFactory (u32 index)=0 |
| Get a scene node factory by index. | |
| virtual ISceneNodeAnimatorFactory * | getDefaultSceneNodeAnimatorFactory ()=0 |
| Get the default scene node animator factory which can create all built-in scene node animators. | |
| virtual void | registerSceneNodeAnimatorFactory (ISceneNodeAnimatorFactory *factoryToAdd)=0 |
| Adds a scene node animator factory to the scene manager. | |
| virtual u32 | getRegisteredSceneNodeAnimatorFactoryCount () const =0 |
| Get amount of registered scene node animator factories. | |
| virtual ISceneNodeAnimatorFactory * | getSceneNodeAnimatorFactory (u32 index)=0 |
| Get scene node animator factory by index. | |
| virtual const c8 * | getSceneNodeTypeName (ESCENE_NODE_TYPE type)=0 |
| Get typename from a scene node type or null if not found. | |
| virtual const c8 * | getAnimatorTypeName (ESCENE_NODE_ANIMATOR_TYPE type)=0 |
| Returns a typename from a scene node animator type or null if not found. | |
| virtual ISceneNode * | addSceneNode (const char *sceneNodeTypeName, ISceneNode *parent=0)=0 |
| Adds a scene node to the scene by name. | |
| virtual ISceneNodeAnimator * | createSceneNodeAnimator (const char *typeName, ISceneNode *target=0)=0 |
| creates a scene node animator based on its type name | |
| virtual ISceneManager * | createNewSceneManager (bool cloneContent=false)=0 |
| Creates a new scene manager. | |
| virtual bool | saveScene (const io::path &filename, ISceneUserDataSerializer *userDataSerializer=0, ISceneNode *node=0)=0 |
| Saves the current scene into a file. | |
| virtual bool | saveScene (io::IWriteFile *file, ISceneUserDataSerializer *userDataSerializer=0, ISceneNode *node=0)=0 |
| Saves the current scene into a file. | |
| virtual bool | saveScene (io::IXMLWriter *writer, const io::path ¤tPath, ISceneUserDataSerializer *userDataSerializer=0, ISceneNode *node=0)=0 |
| Saves the current scene into a file. | |
| virtual bool | loadScene (const io::path &filename, ISceneUserDataSerializer *userDataSerializer=0, ISceneNode *rootNode=0)=0 |
| Loads a scene. Note that the current scene is not cleared before. | |
| virtual bool | loadScene (io::IReadFile *file, ISceneUserDataSerializer *userDataSerializer=0, ISceneNode *rootNode=0)=0 |
| Loads a scene. Note that the current scene is not cleared before. | |
| virtual IMeshWriter * | createMeshWriter (EMESH_WRITER_TYPE type)=0 |
| Get a mesh writer implementation if available. | |
| virtual ISkinnedMesh * | createSkinnedMesh ()=0 |
| Get a skinned mesh, which is not available as header-only code. | |
| virtual void | setAmbientLight (const video::SColorf &ambientColor)=0 |
| Sets ambient color of the scene. | |
| virtual const video::SColorf & | getAmbientLight () const =0 |
| Get ambient color of the scene. | |
| virtual void | setLightManager (ILightManager *lightManager)=0 |
| Register a custom callbacks manager which gets callbacks during scene rendering. | |
| virtual E_SCENE_NODE_RENDER_PASS | getCurrentRenderPass () const =0 |
| Get current render pass. | |
| virtual void | setCurrentRenderPass (E_SCENE_NODE_RENDER_PASS nextPass)=0 |
| Set current render pass. | |
| virtual const IGeometryCreator * | getGeometryCreator (void) const =0 |
| Get an instance of a geometry creator. | |
| virtual bool | isCulled (const ISceneNode *node) const =0 |
| Check if node is culled in current view frustum. | |
 Public Member Functions inherited from jpp::IReferenceCounted | |
| IReferenceCounted () | |
| Constructor. | |
| virtual | ~IReferenceCounted () |
| Destructor. | |
| void | grab () const |
| Grabs the object. Increments the reference counter by one. | |
| bool | drop () const |
| Drops the object. Decrements the reference counter by one. | |
| s32 | getReferenceCount () const |
| Get the reference count. | |
| const c8 * | getDebugName () const |
| Returns the debug name of the object. | |
Additional Inherited Members | |
| Protected Member Functions inherited from jpp::IReferenceCounted | |
| void | setDebugName (const c8 *newName) |
| Sets the debug name of the object. | |
The Scene Manager manages scene nodes, mesh resources, cameras and all the other stuff.
All Scene nodes can be created only here. There is a always growing list of scene nodes for lots of purposes: Indoor rendering scene nodes like the Octree (addOctreeSceneNode()) or the terrain renderer (addTerrainSceneNode()), different Camera scene nodes (addCameraSceneNode(), addCameraSceneNodeMaya()), scene nodes for Light (addLightSceneNode()), Billboards (addBillboardSceneNode()) and so on. A scene node is a node in the hierarchical scene graph. Every scene node may have children, which are other scene nodes. Children move relative the their parents position. If the parent of a node is not visible, its children won't be visible, too. In this way, it is for example easily possible to attach a light to a moving car or to place a walking character on a moving platform on a moving ship. The SceneManager is also able to load 3d mesh files of different formats. Take a look at getMesh() to find out what formats are supported. If these formats are not enough, use addExternalMeshLoader() to add new formats to the engine.
|
pure virtual |
Adds a scene node for rendering an animated mesh model.
| mesh | Pointer to the loaded animated mesh to be displayed. |
| parent | Parent of the scene node. Can be NULL if no parent. |
| id | Id of the node. This id can be used to identify the scene node. |
| position | Position of the space relative to its parent where the scene node will be placed. |
| rotation | Initial rotation of the scene node. |
| scale | Initial scale of the scene node. |
| alsoAddIfMeshPointerZero | Add the scene node even if a 0 pointer is passed. |
|
pure virtual |
add a static arrow mesh to the meshpool
| name | Name of the mesh |
| vtxColorCylinder | color of the cylinder |
| vtxColorCone | color of the cone |
| tesselationCylinder | Number of quads the cylinder side consists of |
| tesselationCone | Number of triangles the cone's roof consists of |
| height | Total height of the arrow |
| cylinderHeight | Total height of the cylinder, should be lesser than total height |
| widthCylinder | Diameter of the cylinder |
| widthCone | Diameter of the cone's base, should be not smaller than the cylinder's diameter |
|
pure virtual |
Adds a billboard scene node to the scene graph.
A billboard is like a 3d sprite: A 2d element, which always looks to the camera. It is usually used for things like explosions, fire, lensflares and things like that.
| parent | Parent scene node of the billboard. Can be null. If the parent moves, the billboard will move too. |
| size | Size of the billboard. This size is 2 dimensional because a billboard only has width and height. |
| position | Position of the space relative to its parent where the billboard will be placed. |
| id | An id of the node. This id can be used to identify the node. |
| colorTop | The color of the vertices at the top of the billboard (default: white). |
| colorBottom | The color of the vertices at the bottom of the billboard (default: white). |
|
pure virtual |
Adds a text scene node, which uses billboards. The node, and the text on it, will scale with distance.
| font | The font to use on the billboard. Pass 0 to use the GUI environment's default font. |
| text | The text to display on the billboard. |
| parent | The billboard's parent. Pass 0 to use the root scene node. |
| size | The billboard's width and height. |
| position | The billboards position relative to its parent. |
| id | An id of the node. This id can be used to identify the node. |
| colorTop | The color of the vertices at the top of the billboard (default: white). |
| colorBottom | The color of the vertices at the bottom of the billboard (default: white). |
|
pure virtual |
Adds a camera scene node to the scene graph and sets it as active camera.
This camera does not react on user input like for example the one created with addCameraSceneNodeFPS(). If you want to move or animate it, use animators or the ISceneNode::setPosition(), ICameraSceneNode::setTarget() etc methods. By default, a camera's look at position (set with setTarget()) and its scene node rotation (set with setRotation()) are independent. If you want to be able to control the direction that the camera looks by using setRotation() then call ICameraSceneNode::bindTargetAndRotation(true) on it.
| position | Position of the space relative to its parent where the camera will be placed. |
| lookat | Position where the camera will look at. Also known as target. |
| parent | Parent scene node of the camera. Can be null. If the parent moves, the camera will move too. |
| id | id of the camera. This id can be used to identify the camera. |
| makeActive | Flag whether this camera should become the active one. Make sure you always have one active camera. |
|
pure virtual |
Adds a camera scene node with an animator which provides mouse and keyboard control appropriate for first person shooters (FPS).
This FPS camera is intended to provide a demonstration of a camera that behaves like a typical First Person Shooter. It is useful for simple demos and prototyping but is not intended to provide a full solution for a production quality game. It binds the camera scene node rotation to the look-at target;
| parent | Parent scene node of the camera. Can be null. |
| rotateSpeed | Speed in degrees with which the camera is rotated. This can be done only with the mouse. |
| moveSpeed | Speed in units per millisecond with which the camera is moved. Movement is done with the cursor keys. |
| id | id of the camera. This id can be used to identify the camera. |
| keyMapArray | Optional pointer to an array of a keymap, specifying what keys should be used to move the camera. If this is null, the default keymap is used. You can define actions more then one time in the array, to bind multiple keys to the same action. |
| keyMapSize | Amount of items in the keymap array. |
| noVerticalMovement | Setting this to true makes the camera only move within a horizontal plane, and disables vertical movement as known from most ego shooters. Default is 'false', with which it is possible to fly around in space, if no gravity is there. |
| jumpSpeed | Speed with which the camera is moved when jumping. |
| invertMouse | Setting this to true makes the camera look up when the mouse is moved down and down when the mouse is moved up, the default is 'false' which means it will follow the movement of the mouse cursor. |
| makeActive | Flag whether this camera should become the active one. Make sure you always have one active camera. |
|
pure virtual |
Adds a maya style user controlled camera scene node to the scene graph.
This is a standard camera with an animator that provides mouse control similar to camera in the 3D Software Maya by Alias Wavefront. The camera does not react on setPosition anymore after applying this animator. Instead use setTarget, to fix the target the camera the camera hovers around. And setDistance to set the current distance from that target, i.e. the radius of the orbit the camera hovers on.
| parent | Parent scene node of the camera. Can be null. |
| rotateSpeed | Rotation speed of the camera. |
| zoomSpeed | Zoom speed of the camera. |
| translationSpeed | TranslationSpeed of the camera. |
| id | id of the camera. This id can be used to identify the camera. |
| distance | Initial distance of the camera from the object |
| makeActive | Flag whether this camera should become the active one. Make sure you always have one active camera. |
|
pure virtual |
Adds a cube scene node.
| size | Size of the cube, uniformly in each dimension. |
| parent | Parent of the scene node. Can be 0 if no parent. |
| id | Id of the node. This id can be used to identify the scene node. |
| position | Position of the space relative to its parent where the scene node will be placed. |
| rotation | Initial rotation of the scene node. |
| scale | Initial scale of the scene node. |
| type | Type of cube-mesh to create. Check ECUBE_MESH_TYPE documentation for more info |
|
pure virtual |
Adds a dummy transformation scene node to the scene graph.
This scene node does not render itself, and does not respond to set/getPosition, set/getRotation and set/getScale. Its just a simple scene node that takes a matrix as relative transformation, making it possible to insert any transformation anywhere into the scene graph.
|
pure virtual |
Adds an empty scene node to the scene graph.
Can be used for doing advanced transformations or structuring the scene graph.
|
pure virtual |
Adds an external mesh loader for extending the engine with new file formats.
If you want the engine to be extended with file formats it currently is not able to load (e.g. .cob), just implement the IMeshLoader interface in your loading class and add it with this method. Using this method it is also possible to override built-in mesh loaders with newer or updated versions without the need to recompile the engine.
| externalLoader | Implementation of a new mesh loader. |
|
pure virtual |
Adds an external scene loader for extending the engine with new file formats.
If you want the engine to be extended with file formats it currently is not able to load (e.g. .vrml), just implement the ISceneLoader interface in your loading class and add it with this method. Using this method it is also possible to override the built-in scene loaders with newer or updated versions without the need to recompile the engine.
| externalLoader | Implementation of a new mesh loader. |
|
pure virtual |
Adds a Hill Plane mesh to the mesh pool.
The mesh is generated on the fly and looks like a plane with some hills on it. It is uses mostly for quick tests of the engine only. You can specify how many hills there should be on the plane and how high they should be. Also you must specify a name for the mesh, because the mesh is added to the mesh pool, and can be retrieved again using ISceneManager::getMesh() with the name as parameter.
| name | The name of this mesh which must be specified in order to be able to retrieve the mesh later with ISceneManager::getMesh(). |
| tileSize | Size of a tile of the mesh. (10.0f, 10.0f) would be a good value to start, for example. |
| tileCount | Specifies how much tiles there will be. If you specify for example that a tile has the size (10.0f, 10.0f) and the tileCount is (10,10), than you get a field of 100 tiles which has the dimension 100.0f x 100.0f. |
| material | Material of the hill mesh. |
| hillHeight | Height of the hills. If you specify a negative value you will get holes instead of hills. If the height is 0, no hills will be created. |
| countHills | Amount of hills on the plane. There will be countHills.X hills along the X axis and countHills.Y along the Y axis. So in total there will be countHills.X * countHills.Y hills. |
| textureRepeatCount | Defines how often the texture will be repeated in x and y direction. return Null if the creation failed. The reason could be that you specified some invalid parameters or that a mesh with that name already exists. If successful, a pointer to the mesh is returned. This pointer should not be dropped. See IReferenceCounted::drop() for more information. |
|
pure virtual |
Adds a dynamic light scene node to the scene graph.
The light will cast dynamic light on all other scene nodes in the scene, which have the material flag video::MTF_LIGHTING turned on. (This is the default setting in most scene nodes).
| parent | Parent scene node of the light. Can be null. If the parent moves, the light will move too. |
| position | Position of the space relative to its parent where the light will be placed. |
| color | Diffuse color of the light. Ambient or Specular colors can be set manually with the ILightSceneNode::getLightData() method. |
| radius | Radius of the light. |
| id | id of the node. This id can be used to identify the node. |
|
pure virtual |
Adds a scene node for rendering a static mesh.
| mesh | Pointer to the loaded static mesh to be displayed. |
| parent | Parent of the scene node. Can be NULL if no parent. |
| id | Id of the node. This id can be used to identify the scene node. |
| position | Position of the space relative to its parent where the scene node will be placed. |
| rotation | Initial rotation of the scene node. |
| scale | Initial scale of the scene node. |
| alsoAddIfMeshPointerZero | Add the scene node even if a 0 pointer is passed. |
|
pure virtual |
Adds a scene node for rendering using a octree to the scene graph.
This a good method for rendering scenes with lots of geometry. The octree is built on the fly from the mesh.
| mesh | The mesh containing all geometry from which the octree will be build. If this animated mesh has more than one frames in it, the first frame is taken. |
| parent | Parent node of the octree node. |
| id | id of the node. This id can be used to identify the node. |
| minimalPolysPerNode | Specifies the minimal polygons contained a octree node. If a node gets less polys than this value it will not be split into smaller nodes. |
| alsoAddIfMeshPointerZero | Add the scene node even if a 0 pointer is passed. |
|
pure virtual |
Adds a scene node for rendering using a octree to the scene graph.
This a good method for rendering scenes with lots of geometry. The octree is built on the fly from the mesh, much faster then a bsp tree.
| mesh | The mesh containing all geometry from which the octree will be build. |
| parent | Parent node of the octree node. |
| id | id of the node. This id can be used to identify the node. |
| minimalPolysPerNode | Specifies the minimal polygons contained a octree node. If a node gets less polys than this value it will not be split into smaller nodes. |
| alsoAddIfMeshPointerZero | Add the scene node even if a 0 pointer is passed. |
|
pure virtual |
Adds a particle system scene node to the scene graph.
| withDefaultEmitter | Creates a default working point emitter which emits some particles. Set this to true to see a particle system in action. If set to false, you'll have to set the emitter you want by calling IParticleSystemSceneNode::setEmitter(). |
| parent | Parent of the scene node. Can be NULL if no parent. |
| id | Id of the node. This id can be used to identify the scene node. |
| position | Position of the space relative to its parent where the scene node will be placed. |
| rotation | Initial rotation of the scene node. |
| scale | Initial scale of the scene node. |
|
pure virtual |
Adds a quake3 scene node to the scene graph.
A Quake3 Scene renders multiple meshes for a specific HighLanguage Shader (Quake3 Style )
|
pure virtual |
Adds a scene node to the scene by name.
|
pure virtual |
Adds a skybox scene node to the scene graph.
A skybox is a big cube with 6 textures on it and is drawn around the camera position.
| top | Texture for the top plane of the box. |
| bottom | Texture for the bottom plane of the box. |
| left | Texture for the left plane of the box. |
| right | Texture for the right plane of the box. |
| front | Texture for the front plane of the box. |
| back | Texture for the back plane of the box. |
| parent | Parent scene node of the skybox. A skybox usually has no parent, so this should be null. Note: If a parent is set to the skybox, the box will not change how it is drawn. |
| id | An id of the node. This id can be used to identify the node. |
|
pure virtual |
Adds a skydome scene node to the scene graph.
A skydome is a large (half-) sphere with a panoramic texture on the inside and is drawn around the camera position.
| texture | Texture for the dome. |
| horiRes | Number of vertices of a horizontal layer of the sphere. |
| vertRes | Number of vertices of a vertical layer of the sphere. |
| texturePercentage | How much of the height of the texture is used. Should be between 0 and 1. |
| spherePercentage | How much of the sphere is drawn. Value should be between 0 and 2, where 1 is an exact half-sphere and 2 is a full sphere. |
| radius | The Radius of the sphere |
| parent | Parent scene node of the dome. A dome usually has no parent, so this should be null. Note: If a parent is set, the dome will not change how it is drawn. |
| id | An id of the node. This id can be used to identify the node. |
|
pure virtual |
add a static sphere mesh to the meshpool
| name | Name of the mesh |
| radius | Radius of the sphere |
| polyCountX | Number of quads used for the horizontal tiling |
| polyCountY | Number of quads used for the vertical tiling |
|
pure virtual |
Adds a sphere scene node of the given radius and detail.
| radius | Radius of the sphere. |
| polyCount | The number of vertices in horizontal and vertical direction. The total polyCount of the sphere is polyCount*polyCount. This parameter must be less than 256 to stay within the 16-bit limit of the indices of a meshbuffer. |
| parent | Parent of the scene node. Can be 0 if no parent. |
| id | Id of the node. This id can be used to identify the scene node. |
| position | Position of the space relative to its parent where the scene node will be placed. |
| rotation | Initial rotation of the scene node. |
| scale | Initial scale of the scene node. |
|
pure virtual |
Adds a static terrain mesh to the mesh pool.
The mesh is generated on the fly from a texture file and a height map file. Both files may be huge (8000x8000 pixels would be no problem) because the generator splits the files into smaller textures if necessary. You must specify a name for the mesh, because the mesh is added to the mesh pool, and can be retrieved again using ISceneManager::getMesh() with the name as parameter.
| meshname | The name of this mesh which must be specified in order to be able to retrieve the mesh later with ISceneManager::getMesh(). |
| texture | Texture for the terrain. Please note that this is not a hardware texture as usual (ITexture), but an IImage software texture. You can load this texture with IVideoDriver::createImageFromFile(). |
| heightmap | A grayscaled heightmap image. Like the texture, it can be created with IVideoDriver::createImageFromFile(). The amount of triangles created depends on the size of this texture, so use a small heightmap to increase rendering speed. |
| stretchSize | Parameter defining how big a is pixel on the heightmap. |
| maxHeight | Defines how high a white pixel on the heightmap is. |
| defaultVertexBlockSize | Defines the initial dimension between vertices. |
|
pure virtual |
Adds a terrain scene node to the scene graph.
This node implements is a simple terrain renderer which uses a technique known as geo mip mapping for reducing the detail of triangle blocks which are far away. The code for the TerrainSceneNode is based on the terrain renderer by Soconne and the GeoMipMapSceneNode developed by Spintz. They made their code available for Irrlicht and allowed it to be distributed under this licence. I only modified some parts. A lot of thanks go to them.
This scene node is capable of loading terrains and updating the indices at runtime to enable viewing very large terrains very quickly. It uses a CLOD (Continuous Level of Detail) algorithm which updates the indices for each patch based on a LOD (Level of Detail) which is determined based on a patch's distance from the camera.
The patch size of the terrain must always be a size of 2^N+1, i.e. 8+1(9), 16+1(17), etc. The MaxLOD available is directly dependent on the patch size of the terrain. LOD 0 contains all of the indices to draw all the triangles at the max detail for a patch. As each LOD goes up by 1 the step taken, in generating indices increases by -2^LOD, so for LOD 1, the step taken is 2, for LOD 2, the step taken is 4, LOD 3 - 8, etc. The step can be no larger than the size of the patch, so having a LOD of 8, with a patch size of 17, is asking the algorithm to generate indices every 2^8 ( 256 ) vertices, which is not possible with a patch size of 17. The maximum LOD for a patch size of 17 is 2^4 ( 16 ). So, with a MaxLOD of 5, you'll have LOD 0 ( full detail ), LOD 1 ( every 2 vertices ), LOD 2 ( every 4 vertices ), LOD 3 ( every 8 vertices ) and LOD 4 ( every 16 vertices ).
| heightMapFileName | The name of the file on disk, to read vertex data from. This should be a gray scale bitmap. |
| parent | Parent of the scene node. Can be 0 if no parent. |
| id | Id of the node. This id can be used to identify the scene node. |
| position | The absolute position of this node. |
| rotation | The absolute rotation of this node. ( NOT YET IMPLEMENTED ) |
| scale | The scale factor for the terrain. If you're using a heightmap of size 129x129 and would like your terrain to be 12900x12900 in game units, then use a scale factor of ( core::vector ( 100.0f, 100.0f, 100.0f ). If you use a Y scaling factor of 0.0f, then your terrain will be flat. |
| vertexColor | The default color of all the vertices. If no texture is associated with the scene node, then all vertices will be this color. Defaults to white. |
| maxLOD | The maximum LOD (level of detail) for the node. Only change if you know what you are doing, this might lead to strange behavior. |
| patchSize | patch size of the terrain. Only change if you know what you are doing, this might lead to strange behavior. |
| smoothFactor | The number of times the vertices are smoothed. |
| addAlsoIfHeightmapEmpty | Add terrain node even with empty heightmap. |
|
pure virtual |
Adds a terrain scene node to the scene graph.
Just like the other addTerrainSceneNode() method, but takes an IReadFile pointer as parameter for the heightmap. For more information take a look at the other function.
| heightMapFile | The file handle to read vertex data from. This should be a gray scale bitmap. |
| parent | Parent of the scene node. Can be 0 if no parent. |
| id | Id of the node. This id can be used to identify the scene node. |
| position | The absolute position of this node. |
| rotation | The absolute rotation of this node. ( NOT YET IMPLEMENTED ) |
| scale | The scale factor for the terrain. If you're using a heightmap of size 129x129 and would like your terrain to be 12900x12900 in game units, then use a scale factor of ( core::vector ( 100.0f, 100.0f, 100.0f ). If you use a Y scaling factor of 0.0f, then your terrain will be flat. |
| vertexColor | The default color of all the vertices. If no texture is associated with the scene node, then all vertices will be this color. Defaults to white. |
| maxLOD | The maximum LOD (level of detail) for the node. Only change if you know what you are doing, this might lead to strange behavior. |
| patchSize | patch size of the terrain. Only change if you know what you are doing, this might lead to strange behavior. |
| smoothFactor | The number of times the vertices are smoothed. |
| addAlsoIfHeightmapEmpty | Add terrain node even with empty heightmap. |
|
pure virtual |
Adds a scene node to the deletion queue.
The scene node is immediately deleted when it's secure. Which means when the scene node does not execute animators and things like that. This method is for example used for deleting scene nodes by their scene node animators. In most other cases, a ISceneNode::remove() call is enough, using this deletion queue is not necessary. See ISceneManager::createDeleteAnimator() for details.
| node | Node to delete. |
|
pure virtual |
Add a volume light mesh to the meshpool.
| name | Name of the mesh |
| SubdivideU | Horizontal subdivision count |
| SubdivideV | Vertical subdivision count |
| FootColor | Color of the bottom of the light |
| TailColor | Color of the top of the light |
|
pure virtual |
adds Volume Lighting Scene Node.
Example Usage: scene::IVolumeLightSceneNode * n = smgr->addVolumeLightSceneNode(0, -1, 32, 32, //Subdivide U/V video::SColor(0, 180, 180, 180), //foot color video::SColor(0, 0, 0, 0) //tail color ); if (n) { n->setScale(core::vector3df(46.0f, 45.0f, 46.0f)); n->getMaterial(0).setTexture(0, smgr->getVideoDriver()->getTexture("lightFalloff.png")); }
|
pure virtual |
Adds a scene node for rendering a animated water surface mesh.
Looks really good when the Material type EMT_TRANSPARENT_REFLECTION is used.
| waveHeight | Height of the water waves. |
| waveSpeed | Speed of the water waves. |
| waveLength | Length of a water wave. |
| mesh | Pointer to the loaded static mesh to be displayed with water waves on it. |
| parent | Parent of the scene node. Can be NULL if no parent. |
| id | Id of the node. This id can be used to identify the scene node. |
| position | Position of the space relative to its parent where the scene node will be placed. |
| rotation | Initial rotation of the scene node. |
| scale | Initial scale of the scene node. |
|
pure virtual |
Clears the whole scene.
All scene nodes are removed.
|
pure virtual |
Clear all nodes which are currently registered for rendering.
Usually you don't have to care about this as drawAll will clear nodes after rendering them. But sometimes you might have to manully reset this. For example when you deleted nodes between registering and rendering.
|
pure virtual |
Creates a special scene node animator for doing automatic collision detection and response.
See ISceneNodeAnimatorCollisionResponse for details.
| world | Triangle selector holding all triangles of the world with which the scene node may collide. You can create a triangle selector with ISceneManager::createTriangleSelector(); |
| sceneNode | SceneNode which should be manipulated. After you added this animator to the scene node, the scene node will not be able to move through walls and is affected by gravity. If you need to teleport the scene node to a new position without it being effected by the collision geometry, then call sceneNode->setPosition(); then animator->setTargetNode(sceneNode); |
| ellipsoidRadius | Radius of the ellipsoid with which collision detection and response is done. If you have got a scene node, and you are unsure about how big the radius should be, you could use the following code to determine it: const core::aabbox3d<f32>& box = yourSceneNode->getBoundingBox();
vector3d< T > getCenter() const Get center of the bounding box. Definition aabbox3d.hpp:106 |
| gravityPerSecond | Sets the gravity of the environment, as an acceleration in units per second per second. If your units are equivalent to meters, then core::vector3df(0,-10.0f,0) would give an approximately realistic gravity. You can disable gravity by setting it to core::vector3df(0,0,0). |
| ellipsoidTranslation | By default, the ellipsoid for collision detection is created around the center of the scene node, which means that the ellipsoid surrounds it completely. If this is not what you want, you may specify a translation for the ellipsoid. |
| slidingValue | DOCUMENTATION NEEDED. |
|
pure virtual |
Creates a scene node animator, which deletes the scene node after some time automatically.
| timeMs | Time in milliseconds, after when the node will be deleted. |
|
pure virtual |
Creates a fly circle animator, which lets the attached scene node fly around a center.
| center | Center of the circle. |
| radius | Radius of the circle. |
| speed | The orbital speed, in radians per millisecond. |
| direction | Specifies the upvector used for alignment of the mesh. |
| startPosition | The position on the circle where the animator will begin. Value is in multiples of a circle, i.e. 0.5 is half way around. (phase) |
| radiusEllipsoid | if radiusEllipsoid != 0 then radius2 from a ellipsoid begin. Value is in multiples of a circle, i.e. 0.5 is half way around. (phase) |
|
pure virtual |
Creates a fly straight animator, which lets the attached scene node fly or move along a line between two points.
| startPoint | Start point of the line. |
| endPoint | End point of the line. |
| timeForWay | Time in milliseconds how long the node should need to move from the start point to the end point. |
| loop | If set to false, the node stops when the end point is reached. If loop is true, the node begins again at the start. |
| pingpong | Flag to set whether the animator should fly back from end to start again. |
|
pure virtual |
Creates a follow spline animator.
The animator modifies the position of the attached scene node to make it follow a Hermite spline. It uses a subset of Hermite splines: either cardinal splines (tightness != 0.5) or Catmull-Rom-splines (tightness == 0.5). The animator moves from one control point to the next in 1/speed seconds. This code was sent in by Matthias Gall. If you no longer need the animator, you should call ISceneNodeAnimator::drop(). See IReferenceCounted::drop() for more information.
|
pure virtual |
Get a mesh writer implementation if available.
Note: You need to drop() the pointer after use again, see IReferenceCounted::drop() for details.
|
pure virtual |
Creates a meta triangle selector.
A meta triangle selector is nothing more than a collection of one or more triangle selectors providing together the interface of one triangle selector. In this way, collision tests can be done with different triangle soups in one pass.
|
pure virtual |
Creates a new scene manager.
This can be used to easily draw and/or store two independent scenes at the same time. The mesh cache will be shared between all existing scene managers, which means if you load a mesh in the original scene manager using for example getMesh(), the mesh will be available in all other scene managers too, without loading. The original/main scene manager will still be there and accessible via JimcppDevice::getSceneManager(). If you need input event in this new scene manager, for example for FPS cameras, you'll need to forward input to this manually: Just implement an IEventReceiver and call yourNewSceneManager->postEventFromUser(), and return true so that the original scene manager doesn't get the event. Otherwise, all input will go to the main scene manager automatically. If you no longer need the new scene manager, you should call ISceneManager::drop(). See IReferenceCounted::drop() for more information.
|
pure virtual |
Creates a Triangle Selector, optimized by an octree.
Triangle selectors can be used for doing collision detection. This triangle selector is optimized for huge amounts of triangle, it organizes them in an octree. Please note that the created triangle selector is not automatically attached to the scene node. You will have to call ISceneNode::setTriangleSelector() for this. To create and attach a triangle selector is done like this:
For more information and examples on this, take a look at the collision tutorial in the SDK.
| mesh | Mesh of which the triangles are taken. |
| node | Scene node of which visibility and transformation is used. |
| minimalPolysPerNode | Specifies the minimal polygons contained a octree node. If a node gets less polys than this value, it will not be split into smaller nodes. |
|
pure virtual |
Creates a Triangle Selector for a single meshbuffer, optimized by an octree.
Triangle selectors can be used for doing collision detection. This triangle selector is optimized for huge amounts of triangle, it organizes them in an octree. Please note that the created triangle selector is not automatically attached to the scene node. You will have to call ISceneNode::setTriangleSelector() for this. To create and attach a triangle selector is done like this:
For more information and examples on this, take a look at the collision tutorial in the SDK.
| meshBuffer | Meshbuffer of which the triangles are taken. |
| materialIndex | Setting this value allows the triangle selector to return the material index |
| node | Scene node of which visibility and transformation is used. |
| minimalPolysPerNode | Specifies the minimal polygons contained a octree node. If a node gets less polys than this value, it will not be split into smaller nodes. |
|
inline |
//! Creates a Triangle Selector, optimized by an octree.
|
pure virtual |
Creates a rotation animator, which rotates the attached scene node around itself.
| rotationSpeed | Specifies the speed of the animation in degree per 10 milliseconds. |
|
pure virtual |
creates a scene node animator based on its type name
| typeName | Type of the scene node animator to add. |
| target | Target scene node of the new animator. |
|
pure virtual |
Create a shadow volume scene node to be used with custom nodes.
Use this if you implement your own SceneNodes and need shadow volumes in them. Otherwise you should generally use addShadowVolumeSceneNode functions from IMeshSceneNode or IAnimatedMeshSceneNode.
|
pure virtual |
Get a skinned mesh, which is not available as header-only code.
Note: You need to drop() the pointer after use again, see IReferenceCounted::drop() for details.
|
pure virtual |
Creates a triangle selector which can select triangles from a terrain scene node.
| node | Pointer to the created terrain scene node |
| LOD | Level of detail, 0 for highest detail. |
|
pure virtual |
Creates a texture animator, which switches the textures of the target scene node based on a list of textures.
| textures | List of textures to use. |
| timePerFrame | Time in milliseconds, how long any texture in the list should be visible. |
| loop | If set to to false, the last texture remains set, and the animation stops. If set to true, the animation restarts with the first texture. |
|
pure virtual |
Creates a simple ITriangleSelector, based on a meshbuffer.
This is a static selector which won't update when the mesh changes.
| meshBuffer | Triangles of that meshbuffer are used |
| materialIndex | If you pass a material index that index can be returned by the triangle selector. \para node: Scene node of which transformation is used. |
|
pure virtual |
Creates a simple ITriangleSelector, based on an animated mesh scene node.
Details of the mesh associated with the node will be extracted internally.
| node | The animated mesh scene node from which to build the selector |
| separateMeshbuffers | When true it's possible to get information which meshbuffer got hit in collision tests. But has a slight speed cost. |
|
pure virtual |
Creates a simple ITriangleSelector, based on a mesh.
Triangle selectors can be used for doing collision detection. Don't use this selector for a huge amount of triangles like in Quake3 maps. Instead, use for example ISceneManager::createOctreeTriangleSelector(). Please note that the created triangle selector is not automatically attached to the scene node. You will have to call ISceneNode::setTriangleSelector() for this. To create and attach a triangle selector is done like this:
| mesh | Mesh of which the triangles are taken. |
| node | Scene node of which transformation is used. |
| separateMeshbuffers | When true it's possible to get information which meshbuffer got hit in collision tests. But has a slight speed cost. |
|
pure virtual |
Creates a simple dynamic ITriangleSelector, based on a axis aligned bounding box.
Triangle selectors can be used for doing collision detection. Every time when triangles are queried, the triangle selector gets the bounding box of the scene node, an creates new triangles. In this way, it works good with animated scene nodes.
| node | Scene node of which the bounding box, visibility and transformation is used. |
|
pure virtual |
Draws all the scene nodes.
This can only be invoked between IVideoDriver::beginScene() and IVideoDriver::endScene(). Please note that the scene is not only drawn when calling this, but also animated by existing scene node animators, culling of scene nodes is done, etc.
|
pure virtual |
Get the current active camera.
|
pure virtual |
Get the default scene node animator factory which can create all built-in scene node animators.
|
pure virtual |
Get the default scene node factory which can create all built in scene nodes.
|
pure virtual |
Get the active FileSystem.
|
pure virtual |
Get an instance of a geometry creator.
The geometry creator provides some helper methods to create various types of basic geometry. This can be useful for custom scene nodes.
|
pure virtual |
Get the active GUIEnvironment.
|
pure virtual |
Get pointer to an animateable mesh. Loads the file if not loaded already.
If you want to remove a loaded mesh from the cache again, use removeMesh(). Currently there are the following mesh formats supported:
| Format | Description |
| 3D Studio (.3ds) | Loader for 3D-Studio files which lots of 3D packages are able to export. Only static meshes are currently supported by this importer. |
| 3D World Studio (.smf) | Loader for Leadwerks SMF mesh files, a simple mesh format containing static geometry for games. The proprietary .STF texture format is not supported yet. This loader was originally written by Joseph Ellis. |
| Bliz Basic B3D (.b3d) | Loader for blitz basic files, developed by Mark Sibly. This is the ideal animated mesh format for game characters as it is both rigidly defined and widely supported by modeling and animation software. As this format supports skeletal animations, an ISkinnedMesh will be returned by this importer. |
| Cartography shop 4 (.csm) | Cartography Shop is a modeling program for creating architecture and calculating lighting. Jimcpp can directly import .csm files thanks to the IrrCSM library created by Saurav Mohapatra which is now integrated directly in Jimcpp. |
| COLLADA (.dae, .xml) | COLLADA is an open Digital Asset Exchange Schema for the interactive 3D industry. There are exporters and importers for this format available for most of the big 3d packagesat http://collada.org. Jimcpp can import COLLADA files by using the ISceneManager::getMesh() method. COLLADA files need not contain only one single mesh but multiple meshes and a whole scene setup with lights, cameras and mesh instances, this loader can set up a scene as described by the COLLADA file instead of loading and returning one single mesh. By default, this loader behaves like the other loaders and does not create instances, but it can be switched into this mode by using SceneManager->getParameters()->setAttribute(COLLADA_CREATE_SCENE_INSTANCES, true); Created scene nodes will be named as the names of the nodes in the COLLADA file. The returned mesh is just a dummy object in this mode. Meshes included in the scene will be added into the scene manager with the following naming scheme: "path/to/file/file.dea#meshname". The loading of such meshes is logged. Currently, this loader is able to create meshes (made of only polygons), lights, and cameras. Materials and animations are currently not supported but this will change with future releases. |
| Delgine DeleD (.dmf) | DeleD (delgine.com) is a 3D editor and level-editor combined into one and is specifically designed for 3D game-development. With this loader, it is possible to directly load all geometry is as well as textures and lightmaps from .dmf files. To set texture and material paths, see scene::DMF_USE_MATERIALS_DIRS. It is also possible to flip the alpha texture by setting scene::DMF_FLIP_ALPHA_TEXTURES to true and to set the material transparent reference value by setting scene::DMF_ALPHA_CHANNEL_REF to a float between 0 and
|
| DirectX (.x) | Platform independent importer (so not D3D-only) for .x files. Most 3D packages can export these natively and there are several tools for them available, e.g. the Maya exporter included in the DX SDK. .x files can include skeletal animations and Jimcpp is able to play and display them, users can manipulate the joints via the ISkinnedMesh interface. Currently, Jimcpp only supports uncompressed .x files. |
| Half-Life model (.mdl) | This loader opens Half-life 1 models, it was contributed by Fabio Concas and adapted by Thomas Alten. |
| Irrlicht Mesh (.irrMesh) | This is a static mesh format written in XML, native to Irrlicht and written by the irr mesh writer. This format is exported by the CopperCube engine's lightmapper. |
| LightWave (.lwo) | Native to NewTek's LightWave 3D, the LWO format is well known and supported by many exporters. This loader will import LWO2 models including lightmaps, bumpmaps and reflection textures. |
| Maya (.obj) | Most 3D software can create .obj files which contain static geometry without material data. The material files .mtl are also supported. This importer for Jimcpp can load them directly. |
| Milkshape (.ms3d) | .MS3D files contain models and sometimes skeletal animations from the Milkshape 3D modeling and animation software. Like the other skeletal mesh loaders, joints are exposed via the ISkinnedMesh animated mesh type. |
| My3D (.my3d) | .my3D is a flexible 3D file format. The My3DTools contains plug-ins to export .my3D files from several 3D packages. With this built-in importer, Jimcpp can read and display those files directly. This loader was written by Zhuck Dimitry who also created the whole My3DTools package. |
| OCT (.oct) | The oct file format contains 3D geometry and lightmaps and can be loaded directly by Jimcpp. OCT files can be created by FSRad, Paul Nette's radiosity processor or exported from Blender using OCTTools which can be found in the exporters/OCTTools directory of the SDK. Thanks to Murphy McCauley for creating all this. |
| OGRE Meshes (.mesh) | Ogre .mesh files contain 3D data for the OGRE 3D engine. Jimcpp can read and display them directly with this importer. To define materials for the mesh, copy a .material file named like the corresponding .mesh file where the .mesh file is. (For example ogrehead.material for ogrehead.mesh). Thanks to Christian Stehno who wrote and contributed this loader. |
| Pulsar LMTools (.lmts) | LMTools is a set of tools (Windows & Linux) for creating lightmaps. Jimcpp can directly read .lmts files thanks to the importer created by Jonas Petersen. Notes for this version of the loader:
|
| Quake 3 levels (.bsp) | Quake 3 is a popular game by IDSoftware, and .pk3 files contain .bsp files and textures/lightmaps describing huge prelighted levels. Irrlicht can read .pk3 and .bsp files directly and thus render Quake 3 levels directly. Written by Nikolaus Gebhardt enhanced by Dean P. Macri with the curved surfaces feature. |
| Quake 2 models (.md2) | Quake 2 models are characters with morph target animation. Jimcpp can read, display and animate them directly with this importer. |
| Quake 3 models (.md3) | Quake 3 models are characters with morph target animation, they contain mount points for weapons and body parts and are typically made of several sections which are manually joined together. |
| Stanford Triangle (.ply) | Invented by Stanford University and known as the native format of the infamous "Stanford Bunny" model, this is a popular static mesh format used by 3D scanning hardware and software. This loader supports extremely large models in both ASCII and binary format, but only has rudimentary material support in the form of vertex colors and texture coordinates. |
| Stereolithography (.stl) | The STL format is used for rapid prototyping and computer-aided manufacturing, thus has no support for materials. |
To load and display a mesh quickly, just do this:
If you would like to implement and add your own file format loader to Jimcpp, see addExternalMeshLoader().
| filename | Filename of the mesh to load. |
| alternativeCacheName | In case you want to have the mesh under another name in the cache (to create real copies) |
|
pure virtual |
Get pointer to an animateable mesh. Loads the file if not loaded already.
Works just as getMesh(const char* filename). If you want to remove a loaded mesh from the cache again, use removeMesh().
| file | File handle of the mesh to load. |
|
pure virtual |
Get interface to the mesh cache which is shared between all existing scene managers.
With this interface, it is possible to manually add new loaded meshes (if ISceneManager::getMesh() is not sufficient), to remove them and to iterate through already loaded meshes.
|
pure virtual |
Retrieve the given mesh loader.
| index | The index of the loader to retrieve. This parameter is an 0-based array index. |
|
pure virtual |
Get pointer to the mesh manipulator.
|
pure virtual |
Get interface to the parameters set in this scene.
String parameters can be used by plugins and mesh loaders. See COLLADA_CREATE_SCENE_INSTANCES and DMF_USE_MATERIALS_DIRS
|
pure virtual |
Gets the root scene node.
This is the scene node which is parent of all scene nodes. The root scene node is a special scene node which only exists to manage all scene nodes. It will not be rendered and cannot be removed from the scene.
|
pure virtual |
Get pointer to the scene collision manager.
|
pure virtual |
Retrieve the given scene loader.
| index | The index of the loader to retrieve. This parameter is an 0-based array index. |
|
pure virtual |
Get scene node animator factory by index.
|
pure virtual |
Get a scene node factory by index.
|
pure virtual |
Get the first scene node with the specified id.
| id | The id to search for |
| start | Scene node to start from. All children of this scene node are searched. If null is specified, the root scene node is taken. |
|
pure virtual |
Get the first scene node with the specified name.
| name | The name to search for |
| start | Scene node to start from. All children of this scene node are searched. If null is specified, the root scene node is taken. |
|
pure virtual |
Get the first scene node with the specified type.
| type | The type to search for |
| start | Scene node to start from. All children of this scene node are searched. If null is specified, the root scene node is taken. |
|
pure virtual |
Get current render pass.
All scene nodes are being rendered in a specific order. First lights, cameras, sky boxes, solid geometry, and then transparent stuff. During the rendering process, scene nodes may want to know what the scene manager is rendering currently, because for example they registered for rendering twice, once for transparent geometry and once for solid. When knowing what rendering pass currently is active they can render the correct part of their geometry.
|
pure virtual |
Get scene nodes by type.
| type | Type of scene node to find (ESNT_ANY will return all child nodes). |
| outNodes | results will be added to this array (outNodes is not cleared). |
| start | Scene node to start from. This node and all children of this scene node are checked (recursively, so also children of children, etc). If null is specified, the root scene node is taken as start-node. |
|
pure virtual |
Get the video driver.
|
pure virtual |
Check if node is culled in current view frustum.
Please note that depending on the used culling method this check can be rather coarse, or slow. A positive result is correct, though, i.e. if this method returns true the node is positively not visible. The node might still be invisible even if this method returns false.
| node | The scene node which is checked for culling. |
|
pure virtual |
Loads a scene. Note that the current scene is not cleared before.
The scene is usually loaded from an .irr file, an xml based format, but other scene formats can be added to the engine via ISceneManager::addExternalSceneLoader. .irr files can Be edited with the Irrlicht Engine Editor, irrEdit (http://www.ambiera.com/irredit/) or saved directly by the engine using ISceneManager::saveScene().
| filename | Name of the file to load from. |
| userDataSerializer | If you want to load user data possibily saved in that file for some scene nodes in the file, implement the ISceneUserDataSerializer interface and provide it as parameter here. Otherwise, simply specify 0 as this parameter. |
| rootNode | Node which is taken as the root node of the scene. Pass 0 to add the scene directly to the scene manager (which is also the default). |
|
pure virtual |
Loads a scene. Note that the current scene is not cleared before.
The scene is usually loaded from an .irr file, an xml based format, but other scene formats can be added to the engine via ISceneManager::addExternalSceneLoader. .irr files can Be edited with the Irrlicht Engine Editor, irrEdit (http://www.ambiera.com/irredit/) or saved directly by the engine using ISceneManager::saveScene().
| file | File where the scene is loaded from. |
| userDataSerializer | If you want to load user data saved in that file for some scene nodes in the file, implement the ISceneUserDataSerializer interface and provide it as parameter here. Otherwise, simply specify 0 as this parameter. |
| rootNode | Node which is taken as the root node of the scene. Pass 0 to add the scene directly to the scene manager (which is also the default). |
|
pure virtual |
Posts an input event to the environment.
Usually you do not have to use this method, it is used by the internal engine.
|
pure virtual |
Registers a node for rendering it at a specific time.
This method should only be used by SceneNodes when they get a ISceneNode::OnRegisterSceneNode() call.
| node | Node to register for drawing. Usually scene nodes would set 'this' as parameter here because they want to be drawn. |
| pass | Specifies when the node wants to be drawn in relation to the other nodes. For example, if the node is a shadow, it usually wants to be drawn after all other nodes and will use ESNRP_SHADOW for this. See scene::E_SCENE_NODE_RENDER_PASS for details. Note: This is not a bitfield. If you want to register a note for several render passes, then call this function once for each pass. |
|
pure virtual |
Adds a scene node animator factory to the scene manager.
Use this to extend the scene manager with new scene node animator types which it should be able to create automatically, for example when loading data from xml files.
|
pure virtual |
Adds a scene node factory to the scene manager.
Use this to extend the scene manager with new scene node types which it should be able to create automatically, for example when loading data from xml files.
|
pure virtual |
Saves the current scene into a file.
Scene nodes with the option isDebugObject set to true are not being saved. The scene is usually written to an .irr file, an xml based format. .irr files can Be edited with the Irrlicht Engine Editor, irrEdit (http://www.ambiera.com/irredit/). To load .irr files again, see ISceneManager::loadScene().
| filename | Name of the file. |
| userDataSerializer | If you want to save some user data for every scene node into the file, implement the ISceneUserDataSerializer interface and provide it as parameter here. Otherwise, simply specify 0 as this parameter. |
| node | Node which is taken as the top node of the scene. This node and all of its descendants are saved into the scene file. Pass 0 or the scene manager to save the full scene (which is also the default). |
|
pure virtual |
Saves the current scene into a file.
Scene nodes with the option isDebugObject set to true are not being saved. The scene is usually written to an .irr file, an xml based format. .irr files can Be edited with the Irrlicht Engine Editor, irrEdit (http://www.ambiera.com/irredit/). To load .irr files again, see ISceneManager::loadScene().
| file | File where the scene is saved into. |
| userDataSerializer | If you want to save some user data for every scene node into the file, implement the ISceneUserDataSerializer interface and provide it as parameter here. Otherwise, simply specify 0 as this parameter. |
| node | Node which is taken as the top node of the scene. This node and all of its descendants are saved into the scene file. Pass 0 or the scene manager to save the full scene (which is also the default). |
|
pure virtual |
Saves the current scene into a file.
Scene nodes with the option isDebugObject set to true are not being saved. The scene is usually written to an .irr file, an xml based format. .irr files can Be edited with the Irrlicht Engine Editor, irrEdit (http://www.ambiera.com/irredit/). To load .irr files again, see ISceneManager::loadScene().
| writer | XMLWriter with which the scene is saved. |
| currentPath | Path which is used for relative file names. Usually the directory of the file written into. |
| userDataSerializer | If you want to save some user data for every scene node into the file, implement the ISceneUserDataSerializer interface and provide it as parameter here. Otherwise, simply specify 0 as this parameter. |
| node | Node which is taken as the top node of the scene. This node and all of its descendants are saved into the scene file. Pass 0 or the scene manager to save the full scene (which is also the default). |
|
pure virtual |
Sets the currently active camera.
The previous active camera will be deactivated.
| camera | The new camera which should be active. |
|
pure virtual |
Register a custom callbacks manager which gets callbacks during scene rendering.
| [in] | lightManager | the new callbacks manager. You may pass 0 to remove the current callbacks manager and restore the default behavior. |