The mesh cache stores already loaded meshes and provides an interface to them. More...

#include <jimcpp/core/engine/IMeshCache.hpp>

Inheritance diagram for jpp::scene::IMeshCache:

Collaboration diagram for jpp::scene::IMeshCache:

Public Member Functions
virtual	~IMeshCache ()
	Destructor.

virtual void	addMesh (const io::path &name, IAnimatedMesh *mesh)=0
	Adds a mesh to the internal list of loaded meshes.

virtual void	removeMesh (const IMesh *const mesh)=0
	Removes the mesh from the cache.

virtual u32	getMeshCount () const =0
	Returns amount of loaded meshes in the cache.

virtual s32	getMeshIndex (const IMesh *const mesh) const =0
	Returns current index number of the mesh or -1 when not found.

virtual IAnimatedMesh *	getMeshByIndex (u32 index)=0
	Returns a mesh based on its index number.

JPP_DEPRECATED IAnimatedMesh *	getMeshByFilename (const io::path &filename)
	Returns a mesh based on its name (often a filename).

JPP_DEPRECATED const io::path &	getMeshFilename (u32 index) const
	Get the name of a loaded mesh, based on its index. (Name is often identical to the filename).

JPP_DEPRECATED const io::path &	getMeshFilename (const IMesh *const mesh) const
	Get the name of a loaded mesh, if there is any. (Name is often identical to the filename).

JPP_DEPRECATED bool	setMeshFilename (u32 index, const io::path &filename)
	Renames a loaded mesh.

JPP_DEPRECATED bool	setMeshFilename (const IMesh *const mesh, const io::path &filename)
	Renames a loaded mesh.

virtual IAnimatedMesh *	getMeshByName (const io::path &name)=0
	Returns a mesh based on its name.

virtual const io::SNamedPath &	getMeshName (u32 index) const =0
	Get the name of a loaded mesh, based on its index.

virtual const io::SNamedPath &	getMeshName (const IMesh *const mesh) const =0
	Get the name of the loaded mesh if there is any.

virtual bool	renameMesh (u32 index, const io::path &name)=0
	Renames a loaded mesh.

virtual bool	renameMesh (const IMesh *const mesh, const io::path &name)=0
	Renames the loaded mesh.

virtual bool	isMeshLoaded (const io::path &name)=0
	Check if a mesh was already loaded.

virtual void	clear ()=0
	Clears the whole mesh cache, removing all meshes.

virtual void	clearUnusedMeshes ()=0
	Clears all meshes that are held in the mesh cache but not used anywhere else.

Public Member Functions inherited from jpp::IReferenceCounted
	IReferenceCounted ()
	Constructor.

virtual	~IReferenceCounted ()
	Destructor.

void	grab () const
	Grabs the object. Increments the reference counter by one.

bool	drop () const
	Drops the object. Decrements the reference counter by one.

s32	getReferenceCount () const
	Get the reference count.

const c8 *	getDebugName () const
	Returns the debug name of the object.

Additional Inherited Members
Protected Member Functions inherited from jpp::IReferenceCounted
void	setDebugName (const c8 *newName)
	Sets the debug name of the object.

Detailed Description

The mesh cache stores already loaded meshes and provides an interface to them.

You can access it using ISceneManager::getMeshCache(). All existing scene managers will return a pointer to the same mesh cache, because it is shared between them. With this interface, it is possible to manually add new loaded meshes (if ISceneManager::getMesh() is not sufficient), to remove them and to iterate through already loaded meshes.

Member Function Documentation

◆ addMesh()

virtual void jpp::scene::IMeshCache::addMesh	(	const io::path &	name,
		IAnimatedMesh *	mesh
	)

pure virtual

Adds a mesh to the internal list of loaded meshes.

Usually, ISceneManager::getMesh() is called to load a mesh from a file. That method searches the list of loaded meshes if a mesh has already been loaded and returns a pointer to if it is in that list and already in memory. Otherwise it loads the mesh. With IMeshCache::addMesh(), it is possible to pretend that a mesh already has been loaded. This method can be used for example by mesh loaders who need to load more than one mesh with one call. They can add additional meshes with this method to the scene manager. The COLLADA loader for example uses this method.

Parameters

name	Name of the mesh. When calling ISceneManager::getMesh() with this name it will return the mesh set by this method.
mesh	Pointer to a mesh which will now be referenced by this name.

◆ clear()

virtual void jpp::scene::IMeshCache::clear ( )

pure virtual

Clears the whole mesh cache, removing all meshes.

All meshes will be reloaded completely when using ISceneManager::getMesh() after calling this method. Warning: If you have pointers to meshes that were loaded with ISceneManager::getMesh() and you did not grab them, then they may become invalid.

◆ clearUnusedMeshes()

virtual void jpp::scene::IMeshCache::clearUnusedMeshes ( )

pure virtual

Clears all meshes that are held in the mesh cache but not used anywhere else.

Warning: If you have pointers to meshes that were loaded with ISceneManager::getMesh() and you did not grab them, then they may become invalid.

◆ getMeshByFilename()

JPP_DEPRECATED IAnimatedMesh * jpp::scene::IMeshCache::getMeshByFilename ( const io::path & filename )

inline

Returns a mesh based on its name (often a filename).

Deprecated:: Use getMeshByName() instead. This method may be removed by Jimcpp 1.9

◆ getMeshByIndex()

virtual IAnimatedMesh * jpp::scene::IMeshCache::getMeshByIndex ( u32 index )

pure virtual

Returns a mesh based on its index number.

Parameters

index Index of the mesh, number between 0 and getMeshCount()-1. Note that this number is only valid until a new mesh is loaded or removed.

Returns: Pointer to the mesh or 0 if there is none with this number.

◆ getMeshByName()

virtual IAnimatedMesh * jpp::scene::IMeshCache::getMeshByName ( const io::path & name )

pure virtual

Returns a mesh based on its name.

Parameters

name	Name of the mesh. Usually a filename.

Returns: Pointer to the mesh or 0 if there is none with this number.

◆ getMeshCount()

virtual u32 jpp::scene::IMeshCache::getMeshCount ( ) const

pure virtual

Returns amount of loaded meshes in the cache.

You can load new meshes into the cache using getMesh() and addMesh(). If you ever need to access the internal mesh cache, you can do this using removeMesh(), getMeshNumber(), getMeshByIndex() and getMeshName().

Returns: Number of meshes in cache.

◆ getMeshFilename() [1/2]

JPP_DEPRECATED const io::path & jpp::scene::IMeshCache::getMeshFilename ( const IMesh *const mesh ) const

inline

Get the name of a loaded mesh, if there is any. (Name is often identical to the filename).

Deprecated:: Use getMeshName() instead. This method may be removed by Jimcpp 1.9

◆ getMeshFilename() [2/2]

JPP_DEPRECATED const io::path & jpp::scene::IMeshCache::getMeshFilename ( u32 index ) const

inline

Get the name of a loaded mesh, based on its index. (Name is often identical to the filename).

Deprecated:: Use getMeshName() instead. This method may be removed by Jimcpp 1.9

◆ getMeshIndex()

virtual s32 jpp::scene::IMeshCache::getMeshIndex ( const IMesh *const mesh ) const

pure virtual

Returns current index number of the mesh or -1 when not found.

Parameters

mesh	Pointer to the mesh to search for.

Returns: Index of the mesh in the cache, or -1 if not found.

◆ getMeshName() [1/2]

virtual const io::SNamedPath & jpp::scene::IMeshCache::getMeshName ( const IMesh *const mesh ) const

pure virtual

Get the name of the loaded mesh if there is any.

Parameters

mesh	Pointer to mesh to query.

Returns: The name if mesh was found and has a name, else the path is empty.

◆ getMeshName() [2/2]

virtual const io::SNamedPath & jpp::scene::IMeshCache::getMeshName ( u32 index ) const

pure virtual

Get the name of a loaded mesh, based on its index.

Parameters

index Index of the mesh, number between 0 and getMeshCount()-1.

Returns: The name if mesh was found and has a name, else the path is empty.

◆ isMeshLoaded()

virtual bool jpp::scene::IMeshCache::isMeshLoaded ( const io::path & name )

pure virtual

Check if a mesh was already loaded.

Parameters

name	Name of the mesh. Usually a filename.

Returns: True if the mesh has been loaded, else false.

◆ removeMesh()

virtual void jpp::scene::IMeshCache::removeMesh ( const IMesh *const mesh )

pure virtual

Removes the mesh from the cache.

After loading a mesh with getMesh(), the mesh can be removed from the cache using this method, freeing a lot of memory.

Parameters

mesh	Pointer to the mesh which shall be removed.

◆ renameMesh() [1/2]

virtual bool jpp::scene::IMeshCache::renameMesh	(	const IMesh *const	mesh,
		const io::path &	name
	)

pure virtual

Renames the loaded mesh.

Note that renaming meshes might change the ordering of the meshes, and so the index of the meshes as returned by getMeshIndex() or taken by some methods will change.

Parameters

mesh	Mesh to be renamed.
name	New name for the mesh.

Returns: True if mesh was renamed.

◆ renameMesh() [2/2]

virtual bool jpp::scene::IMeshCache::renameMesh	(	u32	index,
		const io::path &	name
	)

pure virtual

Renames a loaded mesh.

Note that renaming meshes might change the ordering of the meshes, and so the index of the meshes as returned by getMeshIndex() or taken by some methods will change.

Parameters

index	The index of the mesh in the cache.
name	New name for the mesh.

Returns: True if mesh was renamed.

◆ setMeshFilename() [1/2]

JPP_DEPRECATED bool jpp::scene::IMeshCache::setMeshFilename	(	const IMesh *const	mesh,
		const io::path &	filename
	)

inline

Renames a loaded mesh.

Deprecated:: Use renameMesh() instead. This method may be removed by Jimcpp 1.9

◆ setMeshFilename() [2/2]

JPP_DEPRECATED bool jpp::scene::IMeshCache::setMeshFilename	(	u32	index,
		const io::path &	filename
	)

inline

Renames a loaded mesh.

Deprecated:: Use renameMesh() instead. This method may be removed by Jimcpp 1.9

The documentation for this class was generated from the following file:

include/jimcpp/core/engine/IMeshCache.hpp

Public Member Functions

Additional Inherited Members

Detailed Description

Member Function Documentation

◆ addMesh()

◆ clear()

◆ clearUnusedMeshes()

◆ getMeshByFilename()

◆ getMeshByIndex()

◆ getMeshByName()

◆ getMeshCount()

◆ getMeshFilename() [1/2]

◆ getMeshFilename() [2/2]

◆ getMeshIndex()

◆ getMeshName() [1/2]

◆ getMeshName() [2/2]

◆ isMeshLoaded()

◆ removeMesh()

◆ renameMesh() [1/2]

◆ renameMesh() [2/2]

◆ setMeshFilename() [1/2]

◆ setMeshFilename() [2/2]